SD186ES/SD186EM Advanced Micro Devices, SD186ES/SD186EM Datasheet - Page 9

• Manufacturer Part Number: SD186ES/SD186EM
• Description: SD186ES/SD186EM Demonstration Board Users Manual
• Manufacturer: Advanced Micro Devices

2. Connect the demonstration board’s DB-9 serial port (either P1 or P0 on the ES
3. Connect the power supply to the barrel connector on the SD186ES/SD186EM
4. Apply power to the board by connecting the power supply to an electrical outlet.
SD186ES/SD186EM Demonstration Board User’s Manual
version of the board; P1 on the EM version of the board) to an available COM
port. Use the serial cable included in the SD186ES/SD186EM demonstration
board kit and note that a DB-9 to DB-25 serial connector adapter is provided
if your host system requires it. The pinout of the demonstration board’s serial
connector is shown on page 2-9.
demonstration board.
Once the board is powered up, the LEDs (CR3-CR10) should flash in an
oscillating pattern.
!
!
DANGER: Make sure the power supply is not plugged into
an electrical outlet before connecting it to the SD186ES/
SD186EM demonstration board
CAUTION: If using your own power supply, ensure that
it is a 5-V supply. Using a 9-V supply will permanently
damage the board.
COM1
COM2
serial
cable
1-3