GB12232BSGAANUA-V01 Jewel Hill Electronic Co., Ltd., GB12232BSGAANUA-V01 Datasheet - Page 18

• Manufacturer Part Number: GB12232BSGAANUA-V01
• Description: SPECIFICATIONS FOR LCD MODULE
• Manufacturer: Jewel Hill Electronic Co., Ltd.

(10) NC terminal should be open. Do not connect anything.
(11) If the logic circuit power is off, do not apply the input signals.
(12) To prevent destruction of the elements by static electricity, be careful to maintain an optimum
10. PRECAUTIONS FOR USING LCD MODULES
(1) The display panel is made of glass. Do not subject it to a mechanical shock or impact by dropping
(2) If the display panel is damaged and the liquid crystal substance leaks out, be sure not to get any in
(3) Do not apply excessive force to the display surface or the adjoining areas since this may cause the
(4) The polarizer covering the display surface of the LCD module is soft and easily scratched. Handle
(5) If the display surface becomes contaminated, breathe on the surface and gently wipe it with a soft
(6) Solvents other than those above mentioned may damage the polarizer.
(7) Extra care to minimize corrosion of the electrode. Water droplets, moisture condensation or a
(8) Install the LCD Module by using the mounting holes. When mounting the LCD Module, make
(9) Do not attempt to disassemble or process the LCD Module.
GB12232B
10.1. HANDLING PRECAUTIONS
it.
your mouth. If the substance contacts your skin or clothes, wash it off using soap and water.
color tone to vary.
this polarizer carefully.
dry cloth. If it is heavily contaminated, moisten a cloth with one of the following solvents:
Especially, do not use the following:
current flow in a high-humidity environment accelerates corrosion of the electrode.
sure it is free of twisting, warping and distortion. In particular, do not forcibly pull or bend the I/O
cable or the backlight cable.
- Be sure to ground the body when handling he LCD Module.
- Tools required for assembling, such as soldering irons, must be properly grounded.
-To reduce the amount of static electricity generated, do not conduct assembling and other work
work environment.
under dry conditions.
- Isopropyl alcohol
- Ethyl alcohol
- Water
- Ketone
- Aromatic solvents
VER: 4.0
JEWEL HILL ELECTRONIC CO.,LTD.
- 17 -
Issue date: 2006/08/01