CME6005 ETC-unknow, CME6005 Datasheet - Page 4

• Manufacturer Part Number: CME6005
• Description: Single And Dual Band Receiver Ic
• Manufacturer: ETC-unknow

CME6005
C-MAX
Preliminary Data Sheet
VCC, GND
V
and GND are the supply voltage inputs. The positive supplies have to be connected externally, and also
CC
the ground pins.
To power down the circuitry it is recommended to use the PON input and not to switch the power supply.
Switching the power supply results in a long power up waiting time.
PON
If PON is connected to GND, the receiver will be activated. The setup time is typically 0.5 sec after applying
GND to this pin. If PON is connected to VCC, the receiver will switch to Power Down mode.
TCO, TCON
The serial signal of the time-code transmitter can be directly decoded by a micro controller. Details about the
time-code format of several transmitters are described separately. If TCO is connected, TCON must be open
or counterwise.
SPEC No.
Revision
State
C-MAX printed
Version
Page
CME6005
A.7
07.12.04
07.12.2004
English
4 of 16