104-IIRO-16 Advanced Digital Logic, Inc., 104-IIRO-16 Datasheet

no-image

104-IIRO-16

Manufacturer Part Number
104-IIRO-16
Description
Pc/104-digital I/o Board
Manufacturer
Advanced Digital Logic, Inc.
Datasheet
104-IIRO-16
104-II-16
K E Y F E AT U R E S :
32-channel PC/104 utility board featuring 16
optically isolated digital inputs with change
of state (COS) detection and 16 electrome -
chanical Form C SPDT relay outputs. The
isolated, non polarized inputs may be driven
by either DC sources of 3-31V (or higher by
special order) or AC sources at frequencies of
40Hz to 10KHz. Optically isolating the digital
inputs from each other, and from the comput -
er, assures smooth, error-free data transmis -
sion in noisy, real-world environments. The
input channels are available via a 34-pin
IDC type header. The 16 electromechanical
relays are de-energized at system power-up
to prevent an unintended control output
signal. Data to the relays are latched. The
relay contacts are available via a 50-pin IDC
type header.
16 optically-isolated, non-polarized CMOS compatible
digital inputs accept ±31VDC or AC rms
IRQ on input change of state (COS) eliminates the need for
constant polling
Slow/
noisy DC inputs
16 Form C electro-mechanical relays switch up to 1A each
The Model 104-IIRO-16 is a low cost
Ph. 858 490-0597 F. 858 490-0599; e-mail: sales@adl-usa.com; web:
Advanced Digital Logic, Inc.; 4411 Morena Blvd., Suite 101; San Diego, CA 92117-4345
ommodate AC voltages and
PC/104 I
104-IIRO-16 104-II-16 104-RO-16
inputs and is also useful for slow DC inputs in
ally disabled to increase the board’s typical
response time to 10µs when used with
faster DC inputs. All
by diodes before input to the opto-isolators.
Current limiting is provided by a 1.8K Ohm,
1/2-Watt resistor in series and accommo -
dates a wide input range.
the base address and IRQ. System interrupts
are software controlled, enabling the board to
generate an interrupt whenever one or more
of the isolated digital inputs changes state.
This eliminates the need for constant polling
and greatly frees up system resources. Model
104-IIRO-16E is an economy version available
without the interrupt Change of State Detection
Each input circuit includes a jumper
The board is installed by jumper selecting
SOLATED
I
F A C T O R Y O P T I O N S :
NPUT
Economy version without COS feature
Input only and relay only versions
Expanded input voltage levels
/R
PC/104-Digital I/O Board
ELAY
feature. Model 104-II-16 features 16 isolated
digital inputs only and the 104-RO-16 features
16 rel ay outputs only.
S O F T WA R E
use in most operating systems and include
a free DOS, Linux and Windows 95/98/Me/
NT/2000/XP/2003 compatible software
package. This includes sample programs and
source code in "C" and Pascal for DOS, and
Visual Basic, Delphi, C++ Builder, and Visual
C++ for Windows. Also included is a graphical
setup program in Windows. Embedded OS
support includes Windows XPe and CE. Linux
support includes install
samples for programming from any user level
via an open source kernel driver.
www.adl-usa.com
The 104-IIRO-16 Series are supported for
O
UTPUT WITH
32-Channel
COS

Related parts for 104-IIRO-16

104-IIRO-16 Summary of contents

Page 1

... Slow/ ommodate AC voltages and noisy DC inputs 16 Form C electro-mechanical relays switch each The Model 104-IIRO- low cost 32-channel PC/104 utility board featuring 16 optically isolated digital inputs with change of state (COS) detection and 16 electrome - chanical Form C SPDT relay outputs. The ...

Page 2

... Block Diagram & Pin Con Spec cations Inputs 16 non-polarized opto-isolated with change of state (COS) detection Input voltage 3V to 31V rms (40 to 10KHz) Input impedance 1.8K Ohm Independently selectable on a per-channel basis ...

Related keywords