104-DA12-8 Advanced Digital Logic, Inc., 104-DA12-8 Datasheet - Page 3

• Manufacturer Part Number: 104-DA12-8
• Description: Pc/104 Analog Output Board With Arbitrary Waveform Generation
• Manufacturer: Advanced Digital Logic, Inc.

Specifications
Analog Outputs
•
•
•
•
•
•
•
•
•
•
•
•
•
Counter/Timer
•
•
Ordering Information
Item Code
104-DA12-8A
104-DA12-8
104-DA12-4A
104-DA12-4
simultaneously
8 Channels
50K Conversions per Second throughput, all channels
(Aggregate throughput of 400K conversions per second)
12-Bit Resolution
4 jumper selected output ranges per channel, 0-5V 0-10V ±5V
±10V
Eight corresponding 4-20mA current sink outputs (external 8 to
36VDC excitation required)
±2 counts DAC Relative Accuracy (typical)
10µS DAC Settling Time (typical, to 3/4 scale)
±0.4% of Full Scale DAC Offset Error
±0.1% of Full Scale DAC Gain Error (typical)
Drive Capability of 5mA per channel, Outputs are Short-Circuit
Protected
30mA cumulative total drive from all DACs
4.096V Voltage Reference
Type 82C54
3 x 16-Bit Down-Counters
Ph. 858 490-0597 F. 858 490-0599; e-mail: [e-mail]; web:
Advanced Digital Logic, Inc.; 4411 Morena Blvd., Suite 101; San Diego, CA 92117-4345
Description
(with ARB)
(without ARB)
(with ARB)
(without ARB)
•
•
•
General
•
•
•
•
CE testing & approval must be done at the system level, in the de-
signed enclosure, and is not done on individual boards.
Counter 0 is an IRQ source (clock-tick interrupt) and frequency
source (counter 0 output is available at P2 connector pin 4)
Counters 1 & 2 are chained (32-bit resolution) and dedicated as
the ARB clock (an interrupt is available based on the DAC update
from the ARB)
2MHz Input Clock Frequency
+5V @ 210mA Power Consumption (typical, no load on the out-
puts)
On-board DC/DC Converter allows operation on +5V Power
Interrupt requests may be generated on channels 3-7 10-12 and
14-15
Environment Tolerance: 0-70°C, 5% to 95% Humidity (non-
condensing) (-40° to +85°C available with special order)
PC/104-Analog I/O Board
www.adl-usa.com