IC-A110 ICOM, IC-A110 Datasheet - Page 7

• Manufacturer Part Number: IC-A110
• Description: VHF AIR BAND Transceiver
• Manufacturer: ICOM

www.DataSheet4U.com
I Power ON
q Push [POWER] to turn power ON.
w Operate the transceiver as indicated in the following sec-
e Select the desired memory channel (or VFO frequency)
r Push and hold [PTT] to transmit, then speak into the mi-
t Release [PTT] to receive.
tions.
with the [V/M] keys.
• When receiving a signal,
• Further adjustment of audio level may be necessary at this point.
• Push [SQL] to adjust the squelch level. (p. 6)
• Push and hold the tuning dial for 1 sec. to select the [TS], each
crophone.
• Transmit indicator
ted from the speaker.
push increments/decrements to the frequency are either 10 kHz
or 1 MHz. (p. 7)
lights.
appears and audio is emit-
I Channel selection
ï VFO/Memory selection
q Push [V/M] to select memory
➥ Rotate the dial to select a de-
w During memory mode opera-
ï External speaker output control
External speaker output can be turned OFF, if desired.
q Push and hold [SQL] for 1 sec.
w Rotate the dial to select “SP OFF”.
e Push [SQL] to turn to the previous mode.
sired frequency/channel.
mode or VFO mode.
tion, push [V/M] key to trans-
fer the memory contents to
VFO.
• Push [V/M] to select VFO
NOTE: Only frequency data is transferred even if the
memory channel has a memory name.
NOTE: This function avail-
able external speaker only.
mode.
BASIC OPERATION
2
4