TDA1015 Philips Semiconductors, TDA1015 Datasheet - Page 6

• Manufacturer Part Number: TDA1015
• Description: 1 to 4 W audio power amplifier
• Manufacturer: Philips Semiconductors

Philips Semiconductors
Product specification
1 to 4 W audio power amplifier
TDA1015
Notes
1. Measured with an ideal coupling capacitor to the speaker load.
2. Measured with a load resistor of 20 k .
3. Measured at P
= 1 W; the frequency response is mainly determined by C1 and C3 for the low frequencies and by
o
C4 for the high frequencies.
4. Independent of load impedance of preamplifier.
5. Unweighted r.m.s. noise voltage measured at a bandwidth of 60 Hz to 15 kHz (12 dB/octave).
6. Ripple rejection measured with a source impedance between 0 and 2 k (maximum ripple amplitude: 2 V).
7. The tab must be electrically floating or connected to the substrate (pin 9).
Fig.3 Test circuit.
November 1982
6