SB2A-16A Qlogic Corporation, SB2A-16A Datasheet - Page 109

• Manufacturer Part Number: SB2A-16A
• Description: Development Tools, SANbox 16-port Switch
• Manufacturer: Qlogic Corporation

Fallback Command
Authority
Syntax
Notes
Examples
59021-06 A
Assigns the pending firmware status back and forth between the active and
inactive firmware images stored in switch memory.
Admin
fallback
The following is an example of the Fallback command:
SANbox2 #> admin start
SANbox2 (admin) #> fallback
Reverting to previous software image.
The Show Switch command displays the two firmware images, active
firmware, inactive firmware, and pending firmware versions.
After executing the Fallback command, reset the switch to activate the
pending firmware. Use the Hotreset command for a non-disruptive
activation. Otherwise, you can use the Reset Switch command.
Please confirm (y/n): [n] y
B – Command Line Interface
Fallback Command
B-11