FEATURES
• Medical Application
• Compact Size, Light Weight
• 100% Full Load Burn-In Test
• Universal AC Input/ Full Range
• UL2601-1, EN60601-1 Approved
• Built-In EMI Filter, Low Ripple Noise
• High Efficiency, Low Working Temperature
• Soft-Start Circuit, Limiting AC Surge Current
• Short Circuit, Overload, and Over Voltage Protected
SPECIFICATIONS:
INPUT SPECIFICATIONS
Input Voltage
Input Frequency
AC Current (typical)
Inrush Current
Leakage Current
OUTPUT SPECIFICATIONS
Output Voltage
Output Voltage Tolerance
Output Adjustment Range
Output Power (max)
Line Regulation
Load Regulation
Output Current
Ripple & Noise (20MHz BW)
Setup, Rise Time
Hold-Up Time
Temperature Coefficient
PROTECTION
Over Voltage Protection
Overload Protection
GENERAL SPECIFICATIONS
Switching Frequency (fixed)
Efficiency
Isolation Voltage (input to output)
Isolation Voltage (input to field ground)
Isolation Resistance
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Humidity (non-condensing)
Vibration
MTBF
PHYSICAL SPECIFICATIONS
Weight
Dimensions
SAFETY & EMC
Agency Approvals
Safety Standards
EMC Standards
All specifications are based on 25
PSMPD65 Series
We reserve the right to change specifications based on technological advances.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
90 – 264VAC (127 – 370VDC)
47 to 440Hz
1.6A @ 115VAC / 1A @ 230VAC
20A @ 115VAC cold start / 40A @ 230VAC cold start.
Less than 0.3mA @ 264VAC
See Table
±4.0% (CH.1) and ±7.0% (CH.2)
CH1: ±10% rated output voltage.
72 Watts with 18CFM min. forced air.
±1% (CH.1) and ±2% (CH.2)
±3% (CH.1) and ±4% (CH.2)
See Table
See Table
800ms and 20ms at full load and 230VAC.
80ms at full load and 230VAC.
±0.04%/°C (0~50°C) on +5V output.
CH.1 115~135% rated output voltage.
73~105W hiccup mode, auto-recovery.
45KHz
PSMPD-65A: 75%
4000VAC for 1 min.
1500VAC for 1min.
100M/500VDC ohms
-10°C to +55°C (refer to derating curve)
-20°C to +85°C (10%~95% RH)
20% to 90% RH
10~500Hz, 2G 10min./1cycle, Period for 60 minutes each along X, Y, and Z axes.
291,300 hours min.
280g
127(L) x 76(W) x 42(H) mm
UL/ CUL/ TUV/ CB/ CE
UL2601-1, TUV EN60601-1, IEC601-1 Approved
EN55011 class B, EN61000-4-2,3,4,5,6,8,11, EN61000-3-2,3, EN60601-1-2, ENV50204
o
C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
PSMPD-65B: 78%
MIL-HDBK-217 (25°C)
AC/DC Medical Power Supply
PSMPD65 Series
Up to 65 Watts
Dual Output