ltl2h3kgk-012a LiteOn Technology Corp., ltl2h3kgk-012a Datasheet - Page 9

• Manufacturer Part Number: ltl2h3kgk-012a
• Description: Thru-hole Led Lamps 5mm Round Allngap/gap/gaasp Yellow-green Ltl2h3kgk-012a
• Manufacturer: LiteOn Technology Corp.

6. Drive Method
7. ESD (Electrostatic Discharge)
Part No. : LTL2H3KGK-012A
BNS-OD-C131/A4
Suggestions to prevent ESD damage:
Static Electricity or power surge will damage the LED.
connected in parallel in an application, it is recommended that a current limiting resistor be
incorporated in the drive circuit, in series with each LED as shown in Circuit A below.
An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs
(B) The brightness of each LED might appear different due to the differences in the I-V characteristics
(A) Recommended circuit
Use a conductive wrist band or anti- electrostatic glove when handling these LEDs
All devices, equipment, and machinery must be properly grounded
Work tables, storage racks, etc. should be properly grounded
Use ion blower to neutralize the static charge which might have built up on surface of the LEDs
plastic lens as a result of friction between LEDs during storage and handing
of those LEDs
Circuit model A
LED
LITE-ON TECHNOLOGY CORPORATION
P r o p e r t y o f L i t e - O n O n l y
Circuit model B
Page :
LED
9
of
11