ltl-1chg-0g1 LiteOn Technology Corp., ltl-1chg-0g1 Datasheet

no-image

ltl-1chg-0g1

Manufacturer Part Number
ltl-1chg-0g1
Description
Thru-hole Led Lamps 3mm Round Allngap/gap/gaasp Yellow-green Ltl-1chg-0g1
Manufacturer
LiteOn Technology Corp.
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
LTL-1CHG-0G1
Manufacturer:
LITEON
Quantity:
40 000
BNS-OD-C131/A4
Part No. : LTL-1CHG-0G1
Features
Package Dimensions
* Low power consumption.
* High efficiency.
* Versatile mounting on P.C. Board or panel.
* I.C. Compatible/low current requirement.
* 3.1 mm diameter package.
NOTES:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25mm(.010") unless otherwise noted.
3. Protruded resin under flange is 1.0mm(.04") max.
4. Lead spacing is measured where the leads emerge from the package.
5. Specifications are subject to change without notice.
LTL-1CHG-0G1
Part No.
LITE-ON TECHNOLOGY CORPORATION
P r o p e r t y o f L i t e - O n O n l y
Green Diffused
Lens
Source Color
Green
Page :
1
of
8

Related parts for ltl-1chg-0g1

ltl-1chg-0g1 Summary of contents

Page 1

... Tolerance is ± 0.25mm(.010") unless otherwise noted. 3. Protruded resin under flange is 1.0mm(.04") max. 4. Lead spacing is measured where the leads emerge from the package. 5. Specifications are subject to change without notice. Part No. : LTL-1CHG-0G1 BNS-OD-C131/ Lens ...

Page 2

... Continuous Forward Current Derating Linear From 50 ℃ Reverse Voltage Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6mm(.063") From Body] Part No. : LTL-1CHG-0G1 BNS-OD-C131/ =25 ℃ A Maximum Rating 100 -55 ℃ 100 ℃ ...

Page 3

... The dominant wavelength, λ wavelength which defines the color of the device. 4. The Iv guarantee should be added ± 15%. Part No. : LTL-1CHG-0G1 BNS-OD-C131/ =25 ℃ A Symbol Min ...

Page 4

... LITE-ON TECHNOLOGY CORPORATION Typical Electrical / Optical Characteristics Curves (25 ℃ Ambient Temperature Unless Otherwise Noted) Part No. : LTL-1CHG-0G1 BNS-OD-C131/ Page : ...

Page 5

... Lead Length After Component Height Feed Hole Pitch Lead Location Center of Component Location Total Taped Thickness Feed Hole Location Adhesive Tape Width Adhesive Tape Position Tape Width Part No. : LTL-1CHG-0G1 BNS-OD-C131/ Symbol D F △ ...

Page 6

... Note: Excessive soldering temperature and/or time might result in deformation of the LED lens or catastrophic failure of the LED. IR reflow is not suitable process for through hole type LED lamp product. Part No. : LTL-1CHG-0G1 BNS-OD-C131/ Wave soldering ...

Page 7

... To verify for ESD damage, check for “light up” and Vf of the suspect LEDs at low currents. The Vf of “good” LEDs should be >2.0V@0.1mA for InGaN product and >1.4V@0.1mA for AlInGaP product. Part No. : LTL-1CHG-0G1 BNS-OD-C131/ ...

Page 8

... White LED is materialized by combining blue LED and phosphors. Color of White LED by an operating current. The appearance and specifications of the product may be modified for improvement, without prior notice. Part No. : LTL-1CHG-0G1 BNS-OD-C131/ ...

Related keywords