ltc3566 Linear Technology Corporation, ltc3566 Datasheet - Page 20

• Manufacturer Part Number: ltc3566
• Description: High Ef?ciency Usb Power Manager Plus 1a Buck-boost Converter
• Manufacturer: Linear Technology Corporation

Buck-Boost Regulator Inductor Selection
Many different sizes and shapes of inductors are avail-
able from numerous manufacturers. Choosing the right
inductor from such a large selection of devices can be
overwhelming, but following a few basic guidelines will
make the selection process much simpler.
The buck-boost converter is designed to work with induc-
tors in the range of 1μH to 5μH. For most applications a
2.2μH inductor will suffi ce. Larger value inductors reduce
ripple current which improves output ripple voltage. Lower
value inductors result in higher ripple current and improved
transient response time. To maximize effi ciency, choose
an inductor with a low DC resistance. For a 3.3V output,
effi ciency is reduced about 3% for a 100mΩ series resis-
tance at 1A load current, and about 2% for 300mΩ series
resistance at 200mA load current. Choose an inductor
with a DC current rating at least 2 times larger than the
maximum load current to ensure that the inductor does
not saturate during normal operation. If output short circuit
is a possible condition, the inductor should be rated to
handle the 2.5A maximum peak current specifi ed for the
buck-boost converter.
APPLICATIONS INFORMATION
LTC3566
Table 5. Recommended Inductors for Buck-Boost Regulator
INDUCTOR TYPE
LPS4018
D53LC
7440430022
CDRH4D22/HP
SD14
20
L (μH)
3.3
2.2
2.0
2.2
2.2
2.0
MAX I
3.25
2.56
2.2
2.5
2.5
2.4
DC
(A)
MAX DCR (Ω)
0.028
0.044
0.045
0.08
0.07
0.02
Different core materials and shapes will change the
size/current and price/current relationship of an induc-
tor. Toroid or shielded pot cores in ferrite or Permalloy
materials are small and do not radiate much energy, but
generally cost more than powdered iron core inductors
with similar electrical characteristics. Inductors that are
very thin or have a very small volume typically have much
higher core and DCR losses, and will not give the best ef-
fi ciency. The choice of which style inductor to use often
depends more on the price vs size, performance and any
radiated EMI requirements than on what the LTC3566
requires to operate.
The inductor value also has an effect on Burst Mode op-
eration. Lower inductor values will cause the Burst Mode
operation switching frequencies to increase.
Table 5 shows several inductors that work well with the
LTC3566’s buck-boost regulator. These inductors offer a
good compromise in current rating, DCR and physical
size. Consult each manufacturer for detailed information
on their entire selection of inductors.
SIZE IN mm (L × W × H)
5.2 × 5.2 × 1.45
3.9 × 3.9 × 1.7
3.9 × 3.9 × 1.7
5.0 × 5.0 × 3.0
4.8 × 4.8 × 2.8
4.7 × 4.7 × 2.4
MANUFACTURER
Coilcraft
www.coilcraft.com
Toko
www.toko.com
Würth Elektronik
www.we-online.com
Sumida
www.sumida.com
Cooper
www.cooperet.com
3566p