sg2001-xn5-tr sg-micro, sg2001-xn5-tr Datasheet

no-image

sg2001-xn5-tr

Manufacturer Part Number
sg2001-xn5-tr
Description
150ma, Low Power, Low Noise, Low Dropout, Linear Regulators
Manufacturer
sg-micro
Datasheet
GENERAL DESCRIPTION
The SG2001/A series low-power, low-noise, low-dropout,
CMOS linear voltage regulators operate from a 2.5V to 5.5V
input and deliver up to 150mA. They are the perfect choice
for low voltage, low power applications. An ultra low
ground current (100
parts attractive for battery operated power systems. The
SG2001/A series also offer ultra low dropout voltage
(105mV at 150mA output) to prolong battery life in
portable electronics. Systems requiring a quiet voltage
source, such as RF applications, will benefit from the
SG2001/A series’ ultra low output noise (30µVRMS). An
external noise bypass capacitor connected to the device’s
BP pin can further reduce the noise level.
The output voltage is preset to voltages in the range of 1.2V
to 5.0V. Other features include a 10nA logic-controlled
shutdown mode,
down protection.
Devices come in 5-pin SOT23 package.
APPLICATIONS
Cellular Telephones
Cordless Telephones
PHS Telephones
PCMCIA Cards
Modems
MP3 Player
Hand-Held Instruments
Palmtop Computers
Electronic Planners
Portable/Battery-Powered Equipment
SG2001/A
SG Micro Limited
www.sg-micro.com
foldback current limit
µA
at 150mA output) makes these
and thermal shut-
150mA, Low Power, Low Noise,
Low Dropout, Linear Regulators
FEATURES
-
-
-
-
-
-
-
-
-
-
PIN CONFIGURATIONS
Low Output Noise: 30µV
Ultra-Low Dropout Voltage:
Low 77µA No-Load Supply Current
Low 100µA Operating Supply Current
Thermal-Overload Protection
Quick Auto-Discharge in Shutdown Status
Output Current Limit
Preset Output Voltages (±1.6% Accuracy)
10nA Logic-Controlled Shutdown
Available in Multiple Output Voltage Versions
105mV at 150mA output
at 150mA Output
Fixed Outputs of 1.2V, 1.5V, 1.8V, 2.5V, 2.8V,
2.85V, 3.0V, 3.3V, 3.6V, and 5.0V
Adjustable Output from 1.24V to 5.0V
GND
EN
IN
1
2
3
SG2001/A
SOT23-5
RMS
typ(10Hz to 100KHz)
(TOP VIEW)
4
5
OUT
BP/FB
REV. B

Related parts for sg2001-xn5-tr

sg2001-xn5-tr Summary of contents

Page 1

... Systems requiring a quiet voltage source, such as RF applications, will benefit from the SG2001/A series’ ultra low output noise (30µVRMS). An external noise bypass capacitor connected to the device’s BP pin can further reduce the noise level. ...

Page 2

... SG2001-1.5XN5/TR - 40°C to +125°C SG2001-1.8XN5/TR - 40°C to +125°C SG2001-2.5XN5/TR - 40°C to +125°C SG2001-2.8XN5/TR - 40°C to +125°C SG2001-2.85XN5/TR - 40°C to +125°C SG2001-3.0XN5/TR - 40°C to +125°C SG2001-3.3XN5/TR - 40°C to +125°C SG2001-3.6XN5/TR - 40°C to +125°C SG2001-5.0XN5/TR - 40° ...

Page 3

... OUT = 0.01µ 100Hz 1KHz 54 2 +25°C 0. +125°C 0. +25°C 0. +125°C 0. +25° 160 15 for OUT IN OUT SG2001 MAX UNITS 5.5 V 1.6 2 2 130 145 µA mV 170 0.15 %/V 0.002 %/mA µV RMS 0.4 1 µA 1 µA µs ℃ ...

Page 4

... Adjustable Voltage Version R (kΩ) V (V) 1 OUT 1.5 13 1.8 28 2.5 63.4 2.8 78.7 2.85 80.6 3.0 88.7 3.3 95.3 5.0 187 Note × 1.2395 OUT OUTPUT C OUT 1μ (kΩ) 2 61.9 61.9 61.9 61.9 61.9 61.9 57.6 61.9 4 INPUT 2.5V TO 5.5V OUT 1μ F SG2001 EN BP OFF GND Fixed Voltage Version SG2001/A OUTPUT C OUT 1μ 0.01μ F ...

Page 5

... 100 Load Current(mA) Ground Pin Current vs.Input Voltage I = 50mA 80 load 60 No Load Input Voltage(V) Output Voltage vs.Input Voltage 6 No Load OUT 2.5V OUT Input Voltage(V) SG2001 OUT 150 V = 2.5V OUT ...

Page 6

... Load Current(mA) Current limit vs.Temperature 1200 1100 1000 900 800 700 600 500 400 300 -40 - Temperature(℃) SG2001 50mA LOAD OUT 100 120 140 T = -40 ℃ 2.5V OUT 120 140 160 V = 2.5V OUT 100 120 140 ...

Page 7

... LOAD 0mA 40µS/div Shutdown Exit Delay 0.01µ 0.1µ 100µS/div Entering Shutdown OUT 40µS/div SG2001/A + 0.5V OUT = 1μF V OUT I LOAD OUT = 50mA LOAD EN V OUT V = 2.5V OUT No Load EN V OUT ...

Page 8

... V = 5.0V OUT 3.0V OUT 2.5V 10 OUT Load Current(mA) Output Noise 10Hz To 100KHz Time(100μs/div) SG2001 0.01μ 10mA LOAD C = 1μF OUT 100 1000 C = 0.01μ 10μF OUT 100 1000 V = 2.5V OUT C = 10μF OUT ...

Page 9

... Time(10μs/div) Application Notes When LDO is used in handheld products, Attention must be paid to voltage spike which would damage SG2001. In such applications, voltage spike will be generated at changer interface and V adapters and USB equipments are hot-inserted. Besides this, handheld products will be tested on the production line on the condition of no battery ...

Page 10

... SG2001/A ...

Page 11

... SGMICRO is dedicated to provide high quality and high performance analog IC products to customers. All SGMICRO products meet the highest industry standards with strict and comprehensive test and quality control systems to achieve world-class consistency and reliability. For information regarding SGMICRO Corporation and its products, see www.sg-micro.com 11 Page SG2001/A ...

Related keywords