24lc014h Microchip Technology Inc., 24lc014h Datasheet - Page 10

• Manufacturer Part Number: 24lc014h
• Description: 1k I 2 C? Serial Eeprom With Half-array Write-protect
• Manufacturer: Microchip Technology Inc.

24AA014H/24LC014H
7.0
Since the device will not acknowledge during a write
cycle, this can be used to determine when the cycle is
complete (this feature can be used to maximize bus
throughput). Once the Stop condition for a write
command has been issued from the master, the device
initiates the internally-timed write cycle and ACK polling
can be initiated immediately. This involves the master
sending a Start condition followed by the control byte
for a Write command (R/W = 0). If the device is still
busy with the write cycle, no ACK will be returned. If no
ACK is returned, the Start bit and control byte must be
re-sent. If the cycle is complete, the device will return
the ACK and the master can then proceed with the next
Read or Write command. See Figure 7-1 for a flow
diagram of this operation.
DS22077B-page 10
ACKNOWLEDGE POLLING
Preliminary
FIGURE 7-1:
Initiate Write Cycle
Send Control Byte
Write Command
with R/W = 0
Acknowledge
Condition to
Send Stop
(ACK = 0)?
Send Start
Did Device
Operation
Send
Next
ACKNOWLEDGE POLLING
FLOW
© 2008 Microchip Technology Inc.
Yes
No