sc60-10a ETC-unknow, sc60-10a Datasheet - Page 2

• Manufacturer Part Number: sc60-10a
• Description: Relay Ssr 50ma 1.5v Dc-in 1.25a 60v Ac/dc-out 6-pin Mini-pdip
• Manufacturer: ETC-unknow

C60 2
CHARACTERISTIC CURVES
MECHANICAL SPECIFICATION
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
• Operating Temperature Range: -40°C to 85°C
• Storage Temperature Range: -40°C to 100°C
• Weight: 1 gm. maximum
• Case: 6 pin dual in line, filled epoxy
WIRING CONFIGURATIONS
NOTES:
1. Series resistor is required to limit input current to
2. The input current is 10 mA for all tests unless
3. The surge current is non-repetitive for a
4. Loads may be connected to positive or negative
5. Continuous load current is rated under the
6. To calculate ON Resistance for a given junction
7. Turn on Time can be controlled with input control
8. Load voltage rating should be derated 10% at
50 mA maximum.
otherwise specified.
maximum duration of 20 ms (See Figure 3).
referenced power supplies. Inductive loads must
be diode suppressed.
conditions of still air and mounted on a printed
circuit board.
temperature calculate the new R On using the
equation shown below:
current. Calculate a new turn-on time:
-40°C
R On =R (25°C) x e 0.006(T J -25°C)
t On =(t Specification Limit )(10mA/I In )
© 2010 TELEDYNE RELAYS
Series C60
2DSC60-X0 Rev --