m83726/20-5001a ETC-unknow, m83726/20-5001a Datasheet - Page 3

• Manufacturer Part Number: m83726/20-5001a
• Description: Electromechanical Relay Spst-no 0.25a 18/32vdc Flange Mount
• Manufacturer: ETC-unknow

NOTES
MECHANICAL SPECIFICATIONS
Date of issue: 07/10
[1] The accuracy specification applies for any combination of operating temperature and voltage.
[2] The accuracy will not be affected by power interruptions up to 1 millisecond, spaced at least 10 milliseconds
apart. Transient and power loss specifications are based on a maximum duty cycle of 1/50.
[3] EMI test limits will not be exceeded during the timing interval or when continuously energized under steady
state conditions, per paragraph 3.23, MIL-PRF-83726C.
[4] Terminals X1, X2 and L must be connected together during the test. Dielectric withstanding voltage and
insulation resistance are measured at sea level between all mutually insulated terminals and between all
terminals and case.
[5] Recycle time is defined as the maximum time power must be removed from terminal X1 to assure that a new
cycle can be completed within the specified timing tolerance.
[6] A four digit number defines the time delay in seconds (or milliseconds). The first three digits are significant
figures, used to define the specific time delay. The fourth digit represents the number of zeros to follow the first
three digits. Examples:
[7] Quality level as specified in MIL-R-83726B, paragraph 3.1.1, 3.1.2 and 3.1.3.
- 1001 = 1 second (1,000 milliseconds)
- 2502 = 25 seconds (25,000 milliseconds)
- 5000 = 0.5 seconds (500 milliseconds)
- 56 -
Page 3 of 3
TD-1435