92hd83 Integrated Device Technology, 92hd83 Datasheet - Page 10

• Manufacturer Part Number: 92hd83
• Description: Single Chip Pc Audio System Codec+speaker Amplifier+capless Hp+ldo
• Manufacturer: Integrated Device Technology

SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
1. DESCRIPTION
92HD83
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
1.1.
1.2.
Overview
Orderable Part Numbers
The 92HD83 is a high fidelity, 6-channel audio codec compatible with the Intel High Definition (HD)
Audio Interface. The 92HD83 codec provides high quality, HD Audio capability to desktop and
multi-media notebooks.
The 92HD83 is designed to meet or exceed premium logo requirements for Microsoft’s Windows
Logo Program (WLP) 3.09 and revisions 4 and 5 as indicated in WLP 3.09.
The 92HD83 provides stereo 24-bit, full duplex resolution supporting sample rates up to 192kHz by
the DAC and ADC. 92HD83 SPDIF outputs support sample rates of 192kHz, 176.4kHz, 96kHz,
88.2kHz, 48kHz, and 44.1kHz. 92HD83 SPDIF input supports sample rates of 96kHz, 88.2kHz,
48kHz, and 44.1kHz. Additional sample rates are supported by the driver software.
The 92HD83 supports a wide range of desktop and multi-media notebook configurations. The 2
independent SPDIF output interfaces provides connectivity to Consumer Electronic equipment like
Dolby Digital decoders, powered speakers, mini disk drives or to a home entertainment system.
Simultaneous HDMI and SPDIF output is possible.
An integrated BTL stereo amplifier is ideal for driving 4ohm or 8ohm integrated speakers in mobile
and ultra-mobile computers. For desktop computers or mobile computers using only one speaker,
the BTL output stage may be configured to support a single mono speaker.
MIC inputs can be programmed with 0/10/20/30dB boost. For more advanced configurations, the
92HD83 has 3 General Purpose I/O (GPIO).
The port presence detect capabilities allow the codecs to detect when audio devices are connected
to the codec. Load impedance sensing helps identify attached peripherals for easy set-up and a bet-
ter user experience. The fully parametric IDT SoftEQ can be initiated upon headphone jack insertion
and removal for protection of notebook speakers.
The 92HD83 operates with a 1.5V, 1.8V or 3.3V digital supply and either 3.3V, or 5V analog supply. It
can also work with 1.5V and 3.3V HDA signaling; the correct signalling level is selected dynamically
based on the power supply voltage on the DVDD-IO pin.
The 92HD83 is available in a 48-pin QFN Environmental (ROHS) package.
Add an “8” to the end for tape and reel delivery. Min/Mult order quantity 2ku.
92HD83C1X5NLGXyyX
92HD83C1X3NLGXyyX
92HD83C1C5NLGXyyX
92HD83C1C3NLGXyyX
yy = silicon stepping/revision, contact sales for current data.
5V Analog, Aux Audio mode enabled
3.3V Analog, Aux Audio mode enabled
5V Analog
3.3V Analog
10
92HD83
PC AUDIO
V 0.96 01/09