h3ds-x Omron Corporation, h3ds-x Datasheet
h3ds-x
Related parts for h3ds-x
h3ds-x Summary of contents
Page 1
... DIN Track Mounted, Standard 17.5-mm Width Timer Range • A wide AC/DC power supply range (24 to 230 VAC VDC) reduces the number of timer models kept in stock. (24 to 230 VAC/VDC with H3DS-XL@) • Smart Dial/Selector-locking Mechanism: Prevents the dials and selectors on the Timer’s front panel from being inadvertently op- erated or being operated without authorization. The lock can only be unlocked and locked with an optional pen-type Lock Key. • ...
Page 2
... Solid-state Multi-functional Timer H3DS-M/-S/-A • Eight operating modes (H3DS-M) and four operating modes (H3DS-S) cover a wide range of applications. • A wide time setting range of 0. 120 h. • Two LEDs indicate power and relay status respectively. Model Number Structure ■ Model Number Legend ...
Page 3
... Accessories (Order Separately) Lock Key Mounting Track End Plate Spacer http://www.ia.omron.com (l) x 7 (l) x 7 (t) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-M/-S/-A Y92S-38 PFP-50N PFP-100N PFP-100N2 PFP-M PEP-S 3 ...
Page 4
... Timer with a solid-state output such as a sensor. 3. The power consumption is for mode A after the Timer counts the time-up time and for the AC input at 50 Hz. The power consumption of the H3DS-ML includes the input circuit with the B1 and A1 terminals short-circuited. http://www.ia.omron.com/ ...
Page 5
... EN61000-4-3: 10 V/m (80 MHz to 1 GHz) (level 3) EN61000-4- power port and output port (level control port with capacitive clamp (level 3) EN61000-4- common mode (level differential mode (level 3) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-M/-S/-A 5 ...
Page 6
... Outputs are turned ON according to designated out- put mode when preset value is reached. (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-M/-S/-A Operating mode selector Output circuit Indicator circuit Power-ON Output indicator indicator Operating mode selector Output circuit Indicator circuit Power-ON Output indicator indicator H3DS-SL@/-AL@ 6 ...
Page 7
... Note supply voltage does not require the designation of polarity. 2. The contact symbol for the H3DS is indicated with contact for conventional timers. ■ Input Connections The inputs of the H3DS-ML@ are voltage (voltage imposition or open) inputs. No-contact Input (Connection to PNP output sensor.) Sensor ...
Page 8
... Selection of Operating Mode (except for H3DS-AL) The H3DS-ML/-SL can be set to any one of the operating modes Turn the operating mode selector with a screwdriver until the desired operating mode appears in the operating mode display win- dow. ...
Page 9
... Output relay and 16 Output relay: NO (output indicator) 15 and 18 Power indicator Note: The start input of the H3DS-ML@ model is activated by applying a voltage to B1 and A2 terminals. The voltage can be applied by turning on the contact between B1 and A1 (Refer to Terminal Arrangement). http://www.ia.omron.com/ Timing chart t– t– ...
Page 10
... Output relay: NO 1±0.6 s (output indicator) (fixed) 15 and 18 Power indicator Note: The start input of the H3DS-ML@ model is activated by applying a voltage to B1 and A2 terminals. The voltage can be applied by turning on the contact between B1 and A1 (Refer to Terminal Arrangement). http://www.ia.omron.com/ Timing chart t–a t–a t t– ...
Page 11
... Operating mode display window and selector (select the mode from and J for the H3DS-ML, from A, B2, E, and J for the H3DS-SL) (Front View) H3DS-AL@ Output indicator (orange) (Lit while Timer output is ON.) ...
Page 12
... To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. http://www.ia.omron.com/ Surface color: Light gray 5Y7/1 (OMRON) 17 (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-M/-S/-A 12 ...
Page 13
... Combinations of long ON- or OFF-time and short OFF- or ON- time setting are possible. • Long time range from 0 for both ON and OFF time settings. Model Number Structure ■ Model Number Legend H3DS - Twin timers 2. L: Smart lock mechanism 3. None: Screw terminal type C: ...
Page 14
... VDC with resistive load (cosφ Operating: –10°C to 55°C (with no icing) Storage: –25°C to 65°C (with no icing) Operating: 35% to 85% (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-F max. bar terminals without sleeves. max. bar terminals without sleeves. 14 ...
Page 15
... EN61000-4-3: 10 V/m (80 MHz to 1 GHz) (level 3) EN61000-4- power port and output port (level control port with capacitive clamp (level 3) EN61000-4- common mode (level differential mode (level 3) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-F 15 ...
Page 16
... OFF indicator (Green) ON/OFF start selector Indicator circuit ROM RAM Clock One-chip microcomputer H3DS-FLC H3DS- (See note 2.) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-F Time scale selector Output circuit 16 ...
Page 17
... Timing chart 0.1 s min OFF ON OFF ON OFF ON OFF OFF OFF ON OFF ON OFF ON OFF (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-F Key hole set time OFF set time OFF 0.1 s min set time OFF set time OFF 17 ...
Page 18
... Lock for OFF-time scale selector (Front View) Attach the enclosed label here as a nameplate. (The label is attached to the Timer's DIN Track hook section at the time of shipment.) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-F Wire connection holes Release holes Wire connection holes 18 ...
Page 19
... To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. http://www.ia.omron.com/ Surface color: Light gray 5Y7/1 (OMRON) 17 Surface color: Light gray 5Y7/1 (OMRON (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-F 19 ...
Page 20
... Solid-state Star-delta Timer H3DS-G • A wide star-time range (up to 120 seconds) and star-delta trans- fer time range ( second) Model Number Structure ■ Model Number Legend H3DS - Star-delta timer 2. L: Smart lock mechanism 3. None: Screw terminal type C: Screw-Less Clamp type Ordering Information ■ ...
Page 21
... Contact output 250 VAC with resistive load (cosφ VDC with resistive load (cosφ Operating: –10°C to 55°C (with no icing) Storage: –25°C to 65°C (with no icing) Operating: 35% to 85% (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-G 21 ...
Page 22
... EN61000-4-3: 10 V/m (80 MHz to 1 GHz) (level 3) EN61000-4- power port and output port (level control port with capacitive clamp (level 3) EN61000-4- common mode (level differential mode (level 3) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-G 22 ...
Page 23
... Star output is turned OFF when the dial set value is reached and delta output is ON after the preset transfer time elapses H3DS-GLC H3DS- (see note) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-G Star operation Output circuit Delta operation Indicator circuit Delta operation indicator 23 ...
Page 24
... Lock Key in the keyhole to the lower right of the dial or selector and turn it clockwise until the dial or selector is completely covered with the red cover. To unlock, turn the Lock Key in the opposite direction. 0 (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-G Key hole 24 ...
Page 25
... Star operation indicator (green (Front View) Attach the enclosed label here as a nameplate. (The label is attached to the Timer's DIN Track hook section at the time of shipment.) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-G Wire connection holes Release holes Wire connection holes 25 ...
Page 26
... To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. http://www.ia.omron.com/ Surface color: Light gray 5Y7/1 (OMRON) 17 Surface color: Light gray 5Y7/1 (OMRON) 17 (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-G 26 ...
Page 27
... End Plate Spacer http://www.ia.omron.com/ Input type Operating mode ON-delay 50 cm (l) x 7 (l) x 7 (t) (c)Copyright OMRON Corporation 2007 All Rights Reserved. Model Screw terminal type Screw-Less Clamp type H3DS-XL H3DS-XLC Y92S-38 PFP-50N PFP-100N PFP-100N2 PFP-M PEP-S 27 ...
Page 28
... Minimum power-off time: 0.1 s 1.0 VAC/VDC max max max. SCR output 0.7 A Operating: –10°C to 55°C (with no icing) Storage: –25°C to 65°C (with no icing) Operating: 35% to 85% (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-X 28 ...
Page 29
... EN61000-4- power port and output port (level control port with capacitive clamp (level 3) EN61000-4- common mode (level differential mode (level 3) Zero setting Time scale/ detection unit selectors circuit Oscillation Counting circuit circuit (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-X Indicator circuit Output circuit 29 ...
Page 30
... Lock Key in the keyhole to the lower right of the dial or selector and turn it clockwise until the dial or selector is completely covered with the red cover. To unlock, turn the Lock Key in the opposite direction. (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-X Key hole 30 ...
Page 31
... ON.) (Front View) Attach the enclosed label here as a nameplate. (The label is attached to the Timer's DIN Track hook section at the time of shipment.) (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-X Wire connection holes Release holes Wire connection holes 31 ...
Page 32
... To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. http://www.ia.omron.com/ Surface color: Light gray 5Y7/1 (OMRON) 17 (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-X 32 ...
Page 33
... Note the overall diameter of the wire is less than 1.8 mm, do not insert the wire past the conductor. Refer to the following di- agrams the overall diameter of the wire is over 2.8 mm, it will be difficult to use double wiring. http://www.ia.omron.com/ H3DS-@LC (c)Copyright OMRON Corporation 2007 All Rights Reserved. 33 ...
Page 34
... Wire connection hole Release hole Fig. 3 Section A-A of Fig Insert the exposed conductor into the wire connection hole. 3. Pull out the screwdriver. http://www.ia.omron.com Insert Screwdriver Insert Insert Pull out (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS-@LC 34 ...
Page 35
... Always insert the screwdriver straight into the hole, never at an angle. The clamp spring may be deformed if the screwdriver is not straight. Do not move the screwdriver side to side in the clamp hole. The clamp spring may be deformed if the screwdriver is moved sideways. http://www.ia.omron.com/ H3DS-@LC (c)Copyright OMRON Corporation 2007 All Rights Reserved. 35 ...
Page 36
... Note: The values shown in parentheses are for the PFP-50N. End Plate PFP pan head screw http://www.ia.omron.com/ 6.4 PFP-100N2 7.3±0.15 4.5 35±0.3 27±0. 1,000 Spacer PFP-S 10 6.2 1.8 1 35.5 35.5 1.8 1.3 4.8 (c)Copyright OMRON Corporation 2007 All Rights Reserved. H3DS 16 27 29.2 24 35±0 1 34.8 44.3 16.5 36 ...
Page 37
... If the load current is continuously being supplied to the Timer for a long period of time, be sure to provide the mounting clearance as shown in the figure below. If used under the conditions other than those specified below (except for the H3DS-XL@), the life of internal components may be shortened due to an excessive rise in the inter- nal temperature. ...
Page 38
... Conformance The H3DS as a built-in timer conforms to EN61812-1 provided that the following conditions are satisfied: The output section of the H3DS is provided only with basic isolation. To ensure reinforced isolation required by the EN61812-1, provide supplementary basic isolation on the load side connected to the out- Power supply put ...
Page 39
... If copying or transmitting this catalog to another, please copy or transmit it in its entirety. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ Read and Understand This Catalog Warranty and Limitations of Liability Application Considerations Disclaimers In the interest of product improvement, specifications are subject to change without notice. (c)Copyright OMRON Corporation 2007 All Rights Reserved. 2007. 3 ...