hfbr59l1al Avago Technologies, hfbr59l1al Datasheet

no-image

hfbr59l1al

Manufacturer Part Number
hfbr59l1al
Description
1.25 Gbd Ethernet And 1.0625 Gbd Fibre Channel 850 Nm Sff Low Voltage 3.3 V Optical Transceiver
Manufacturer
Avago Technologies
Datasheet
HFBR-59L1AL
1.25 GBd Ethernet and 1.0625 GBd Fibre Channel 850 nm
SFF Low Voltage (3.3 V) Optical Transceiver
Data Sheet
Description
The HFBR-59L1AL from Avago Technologies is a high per-
formance, cost-effective optical transceiver for serial op-
tical data communications applications operating at 1.25
Gb/s and 1.0625 Gb/s. This module is designed for multi-
mode fiber and operates at a nominal wavelength of 850
nm.
The transceiver incorporates 3.3 V DC compatible tech-
nology including an 850 nm VCSEL transmitter. The HFBR-
59L1AL offers maximum flexibility to Fibre Channel and
Ethernet designers, manufacturers, and system integra-
tors. It is designed for use in short reach multimode fiber
optic 1000BASE-SX and Fiber Channel (100-M5-SN-1)
links.
This device is also designed for a wide voltage and tem-
perature range of operation. This transceiver is compliant
with the Small Form Factor Multi-Source Agreement and
is fully compliant with all equipment meeting the Gigabit
Ethernet (1000 Base-SX) and Fibre Channel (FC-PI 100-M5-
SN-I, FC-PI 100-M6-SN-I, FC-PH2 100-M5-SN and FC-PH2
100-M6-SN-I 1.0625 GBd) specifications.
Related Products
• HFCT-59L1ATL: 1300 nm Small Form Factor optical
• HFBR-5911L/AL: 850 nm Small Form Factor optical
• HFBR-5701L/LP: 850 nm Small Form Factor Pluggable
• HDMP-2634: Single SerDes IC 2.5/1.25 Gigabit
• HDMP-1687: Quad SerDes IC for Gigabit Ethernet with
• HDMP-1685A: Quad SerDes IC for Gigabit Ethernet with
• HDMP-1636A/46A: Single SerDes IC for Gigabit Ethernet
• HDMP-1637A: Single SerDes IC with PECL RefClk
• HDMP-1638: Single SerDes IC with PECL RefClk and
transceiver for 10 km Gigabit Ethernet links
transceiver for short reach Gigabit Ethernet (1000BASE-
SX) links
optical transceiver for short reach Gigabit Ethernet
(1000BASE-SX) and 1.0625 Gbd Fibre Channel links
10 bit parallel interface and TTL clock input
5 bit parallel interface and DDR TTL clock input
and Fiber Channel
Dual Serial I/O
Description
The HFBR-59L1AL from Agilent
Technologies is a high
performance, cost-effective
optical transceiver for serial
optical data communications
applications operating at
1.25 Gb/s and 1.0625 Gb/s. This
module is designed for
multimode fiber and operates at
a nominal wavelength of 850 nm.
The transceiver incorporates
3.3 V DC compatible technology
including an 850 nm VCSEL
transmitter. The HFBR-59L1AL
offers maximum flexibility to
Fibre Channel and Ethernet
designers, manufacturers, and
system integrators. It is
designed for use in short reach
multimode fiber optic
1000BASE-SX and Fiber
Channel (100-M5-SN-1) links.
This device is also designed for a
wide voltage and temperature
range of operation.
This transceiver is compliant
with the Small Form Factor
Multi-Source Agreement and is
fully compliant with all
equipment meeting the Gigabit
Ethernet (1000 Base-SX) and
Fibre Channel (FC-PI 100-M5-
SN-I, FC-PI 100-M6-SN-I, FC-PH2
100-M5-SN and FC-PH2 100-M6-
SN-I 1.0625 GBd) specifications.
Features
• Data rate specification: 1.25 GBd operation for
• Wide temperature and supply voltage operation
• Industry standard 2 x 5 SFF package
• LC-duplex connector optical interface
• Link lengths at 1.25 GBd:
• Link lengths at 1.0625 GBd:
• Reliable 850 nm Vertical Cavity Surface Emitting Laser
• Laser AEL Class I (eye safe) per:
• Single +3.3 V power supply operation
• Wave solder and aqueous wash process compatible
Applications
• Short reach Gigabit Ethernet links
• High speed backplane interconnects
• Switched backbones
• iSCSI applications
• Mass storage system I/O
• Computer system I/O
• High speed peripheral interface
• High speed switching systems
• Host adaptor I/O
IEEE 802.3 Gigabit Ethernet 1000BASE-SX 1.0625
GBd operation for FC-PI 100-M5-SN-I and FC-PI
100-M6-SN-I
0.5 to 500 m – 50/125 mm MMF
0.5 to 275 m – 62.5/125 mm MMF
0.5 to 500 m – 50/125 mm MMF
0.5 to 300 m – 62.5/125 mm MMF
(VCSEL) source technology
US 21 CFR (J)
EN 60825-1 (+All)
Transceiver
Data Sheet
Related Products
• HFCT-59L1ATL: 1300 nm Small
• HFBR-5911L/AL: 850 nm Small
• HFBR-5701L/LP: 850 nm Small
• HDMP-2634: Single SerDes IC
• HDMP-1687: Quad SerDes IC for
• HDMP-1685A: Quad SerDes IC for
• HDMP-1636A/46A: Single SerDes
• HDMP-1637A: Single SerDes IC
• HDMP-1638: Single SerDes IC
Form Factor optical transceiver
for 10 km Gigabit Ethernet links
Form Factor optical transceiver
for short reach Gigabit Ethernet
(1000BASE-SX) links
Form Factor Pluggable optical
transceiver for short reach
Gigabit Ethernet (1000BASE-SX)
and 1.0625 Gbd Fibre Channel
links
2.5/1.25 Gigabit
Gigabit Ethernet with 10 bit
parallel interface and TTL clock
input
Gigabit Ethernet with 5 bit
parallel interface and DDR TTL
clock input
IC for Gigabit Ethernet and Fiber
Channel
with PECL RefClk
with PECL RefClk and Dual Serial
I/O
Features
Applications
Data rate specification:
1.25 GBd operation for IEEE 802.3
Gigabit Ethernet 1000BASE-SX
1.0625 GBd operation for FC-PI
100-M5-SN-I and FC-PI 100-M6-
SN-I
Wide temperature and supply
voltage operation
Industry standard 2 x 5 SFF
package
LC-duplex connector optical
interface
Link lengths at 1.25 GBd:
0.5 to 500 m – 50/125 mm MMF
0.5 to 275 m – 62.5/125 mm MMF
Link lengths at 1.0625 GBd:
0.5 to 500 m – 50/125 mm MMF
0.5 to 300 m – 62.5/125 mm MMF
Reliable 850 nm Vertical Cavity
Surface Emitting Laser (VCSEL)
source technology
Laser AEL Class I (eye safe) per:
US 21 CFR (J)
EN 60825-1 (+All)
Single +3.3 V power supply
operation
Wave solder and aqueous wash
process compatible
Short reach Gigabit Ethernet links
High speed backplane
interconnects
Switched backbones
iSCSI applications
Mass storage system I/O
Computer system I/O
High speed peripheral interface
High speed switching systems
Host adaptor I/O

Related parts for hfbr59l1al

hfbr59l1al Summary of contents

Page 1

... GBd Ethernet and 1.0625 GBd Fibre Channel 850 nm SFF Low Voltage (3.3 V) Optical Transceiver Data Sheet Description The HFBR-59L1AL from Avago Technologies is a high per- formance, cost-effective optical transceiver for serial op- tical data communications applications operating at 1.25 Gb/s and 1.0625 Gb/s. This module is designed for multi- mode fiber and operates at a nominal wavelength of 850 nm ...

Page 2

HFBR-59L1AL BLOCK DIAGRAM HFBR-59L1AL BLOCK DIAGRAM RECEIVER RECEIVER LIGHT FROM FIBER PHOTO-DETECTOR LIGHT FROM FIBER PHOTO-DETECTOR OPTICAL INTERFACE OPTICAL INTERFACE TRANSMITTER TRANSMITTER LIGHT TO FIBER LIGHT TO FIBER Figure 1. Transceiver functional diagram. (See Process Compatibility Specifications). Figure 1. Transceiver ...

Page 3

... Electromagnetic Interference (EMI) Most equipment designs utilizing these high-speed transceivers from Avago Technologies will be required to meet the requirements of FCC in the United States, CEN- ELEC EN55022 (CISPR 22) in Europe and VCCI in Japan. The metal housing and shielded design of the HFBR-59L1AL minimize the EMI challenge facing the host equipment designer ...

Page 4

... Please contact your local field sales engineer or one of recommended absolute Avago Technologies franchised distributors for order- maximum conditions or ing information. For technical information regarding this operating the HFBR-59L1AL in a product, including the MSA, please visit Avago Technolo- manner inconsistent with its gies Semiconductors Products Website at www ...

Page 5

GP04 VREFR VREFR TX[0:9] TBC TBC EWRAP EWRAP HDMP-1687 PROTOCOL HDMP-1636A IC RX[0:9] RBC RBC Rx_RATE Rx_RATE REFCLK Rx_SD REFCLK 106.25 MHz Figure 3. Typical application configuration 0.1 µ 0.1 µF 10 µF SFF ...

Page 6

Table 2. Pin Description Pin Name RD Disable 9 TD+ 10 TD- Notes: 1. Transmitter and Receiver ...

Page 7

Absolute Maximum Ratings Parameter Symbol Storage Temperature T S Case Temperature T C Relative Humidity RH Supply Voltage Data/Control Input Voltage V I Sense Output Current I D Signal Detect [SD] Notes: 1. Absolute Maximum Ratings ...

Page 8

Transceiver Electrical Characteristics (T = -10 °C to +85 ° 3.3 V ±10 Parameter Symbol AC Electrical Characteristics Power Supply Noise Rejection PSNR (Peak-to-Peak) DC Electrical Characteristics Module Supply Current I CC Power Dissipation ...

Page 9

Transmitter and Receiver Electrical Characteristics (T = -10 °C to +85 ° 3.3 V ±10 Parameter Symbol Data Input Transmitter Differential Input Voltage (TD +/-) Data Output Receiver Differential Output ...

Page 10

Transmitter Optical Characteristics (T = -10 °C to +85 ° 3.3 V ±10 Parameter Symbol Output Optical Power (Average) POUT POUT Optical Extinction Ratio ER Optical Modulation Amplitude OMA (Peak-to-Peak) 1.0625 Gb/s Center Wavelength ...

Page 11

Receiver Optical Characteristics (T = -10 °C to +85 ° 3.3 V ±10 Parameter Symbol Optical Power PIN Receiver Sensitivity (Optical PRMIN Input Power) 1.25 Gb/s Min Optical Modulation OMA Amplitude (Peak-to-Peak) 1.0625 Gb/s ...

Page 12

V CC > 2.97 V Tx_FAULT Tx_DISABLE TRANSMITTED SIGNAL t_init t-init: TX DISABLE DE-ASSERTED Tx_FAULT Tx_DISABLE TRANSMITTED SIGNAL t_off t-off & t-on: TX DISABLE ASSERTED THEN NEGATED OCCURANCE OF FAULT Tx_FAULT Tx_DISABLE TRANSMITTED SIGNAL t_reset * SFP SHALL CLEAR TX_FAULT ...

Page 13

AVAGO HFBR-59L1AL 850 nm LASER PROD 21CFR(J) CLASS 1 COUNTRY OF ORIGIN YYWW XXXXXX 13.59 (0.535) 3.25 (0.128) 2.92 (0.115) 10.16 (0.400) DIMENSIONS ARE IN MILLIMETERS (INCHES) Figure 6a. Module drawing. 13 MAX. THERMOCOUPLE TEST POINT 48.19 (1.897) 13.63 9.80 ...

Page 14

... For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2008 Avago Technologies Limited. All rights reserved. ...

Related keywords