maap-000042-smb003 ETC-unknow, maap-000042-smb003 Datasheet - Page 8

• Manufacturer Part Number: maap-000042-smb003
• Description: Amplifier, Power, X/ku-band 12-16
• Manufacturer: ETC-unknow

8
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Amplifier, Power, 1W, X/Ku-Band
12-16 GHz
*Application Notes can be found by going to the Site Search Page of M/A-COM’s web page (http://www.macom.com/Application%20Notes/
Refer to M/A-COM Application Note Surface Mounting Instructions for PQFN Packages #S2083* for assembly guidelines.
Additional Precaution: All parts must receive a bake-out of 125ºC for 24 hours prior to any solder reflow operation.
Note: The exposed pad centered on the package bottom must be connected to RF
Figure 28. Recommended Bias Configuration.
index.htm) and searching for the required Application Note.
and dc ground for proper electrical and thermal operation.
V
GG
Figure 27. 5x5 mm 20-Lead MLP.
200 Ω
Compliant
package as possible
0.1μF
As close to the
RoHS
AP042G
MACOM
YYWW
XXXX
100pF
package as possible
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.
100pF
As close to the
0.1μF
V
DD
MAAP-000042-PKG003
Preliminary Datasheet
Rev A