maap-000038-pkg003 ETC-unknow, maap-000038-pkg003 Datasheet - Page 4

• Manufacturer Part Number: maap-000038-pkg003
• Description: Amplifier, Power, 1.2w 9.0-12.0
• Manufacturer: ETC-unknow

4
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Amplifier, Power, 1.2W
9.0-12.0 GHz
*Application Notes can be found by going to the Site Search Page of M/A-COM’s web page (http://www.macom.com/search/search.jsp) and
Refer to M/A-COM Application Note Surface Mounting Instructions for PQFN Packages #S2083* for assembly guidelines.
Additional Precaution: All parts must receive a bake-out of 125ºC for 24 hours prior to any solder reflow operation.
AP000038
V
GG
Note: The exposed
0.1μF
(as close to the package as possible)
(as close to the package as possible)
Figure 8. Recommended Bias Configuration.
and dc ground for proper electrical and thermal operation.
Figure 7. 5x5 mm 20-Lead MLP.
searching for the required Application Note.
pad centered on the package bottom must be connected to RF
100pF
100pF
AP0038
MACOM
YYWW
XXXX
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.
100pF
(as close to the package as possible)
100pF
(as close to the package as possible)
0.1μF
MAAP-000038-PKG003
V
DD
Advance Information
Rev —