*
Copyright 2002
11-06-2003 REV A
TVS devices are not typically used for dc power dissipation and are instead operated at or less than their rated standoff voltage
(V
IMPORTANT: For the most current data, consult MICROSEMI’s website:
WM
) except for transients that briefly drive the device into avalanche breakdown (V
This Transient Voltage Suppressor (TVS) series for 1N5555 thru 1N5558
are JEDEC registered selections for unidirectional devices. All have the
same high Peak Pulse Power rating of 1500 W with extremely fast
response times. They are also available in military qualified selections as
described in the Features section herein. They are most often used for
protecting against transients from inductive switching environments,
induced RF effects, or induced secondary lightning effects as found in
lower surge levels of IEC61000-4-5.
protecting airborne avionics and electrical systems. Since their response
time is virtually instantaneous, they can also protect from ESD and EFT per
IEC61000-4-2 and IEC61000-4-4.
• Unidirectional TVS series for thru-hole mounting
• Working voltage (V
• Hermetic sealed DO-13 metal package
• JAN/TX/TXV military qualifications also available per
• For bidirectional TVS in the same DO-13 package, see
• Surface mount equivalent packages also available
• Plastic axial-leaded equivalents available from the
• 1500 Watts for 10/1000 µs
• Operating & Storage Temperatures: -65
• THERMAL RESISTANCE: 50
• DC Power Dissipation
• Forward surge current: 200 Amps for 8.3ms half-sine
• Solder Temperatures: 260
MIL-PRF-19500/500 by adding the JAN, JANTX, or
JANTXV prefix, e.g. JANTXV1N5555, etc.
separate data sheet for the 1N6036 – 1N6072A series
(also military qualified)
from the SMCJ5.0 - SMCJ170CA or SMCG5.0 –
SMCG170C series in separate data sheet (consult
factory for other surface mount options)
1N6267 – 1N6303A series in separate data sheet
less*
0.375 inches (10 mm) from body or 110
ambient when mounted on FR4 PC board with 4 mm
copper pads (1oz) and track width 1 mm, length 25 mm
mm) from body (see derating in Fig 3)
wave at T
at lead temperature (T
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
A
= +25
MAXIMUM RATINGS
S C O T T S D A L E D I V I S I O N
o
FEATURES
C
WM
) range 30.5 V to 175 V
*
: 1 Watt at T
with repetition rate of 0.01% or
o
L
DESCRIPTION
) 25
C for 10 s (maximum)
o
C/W junction to lead at
o
C (see Figs 1, 2, & 4)
L
= +25
o
o
C/W junction to
They are also very successful in
to +175
o
C 3/8” (10
Scottsdale Division
Microsemi
o
C
2
TRANSIENT VOLTAGE SUPPRESSOR
http://www.microsemi.com
•
1500 WATT UNIDIRECTIONAL
• Suppresses transients up to 1500 watts @ 10/1000
• Clamps transient in less than 100 pico seconds
• Protection from switching transients and induced RF
• Protection from ESD and EFT per IEC 61000-4-2
• Secondary lightning protection per IEC61000-4-5
• Secondary lightning protection per IEC61000-4-5
• CASE: DO-13 (DO-202AA), welded, hermetically
• FINISH: All external metal surfaces are Tin-Lead
• POLARITY: Cathode connected to case and
• MARKING: Part number and polarity diode symbol
• WEIGHT: 1.4 grams. (Approx)
• TAPE & REEL option: Standard per EIA-296 (add
• See package dimension on last page
sealed metal and glass
plated and solderable per MIL-STD-750 method
2026
polarity indicated by diode symbol
“TR” suffix to part number)
Inherently radiation hard as described in Microsemi
MicroNote 050
µs (see Figure 1)
and IEC 61000-4-4
with 42 Ohms source impedance:
with 12 Ohms source impedance:
Class 1: 1N5555 to 1N5558
Class 2 & 3: 1N5555 to 1N5557
Class 4: 1N5555 to 1N5556
Class 1: 1N5555 to 1N5557
Class 2: 1N5555 to 1N5557
MECHANICAL AND PACKAGING
1N5555
1N5557
APPLICATIONS / BENEFITS
BR
to V
C
region).
1N5556
1N5558
APPEARANCE
(DO-202AA)
DO-13
Page 1