ts03wlf C&K Components, ts03wlf Datasheet

no-image

ts03wlf

Manufacturer Part Number
ts03wlf
Description
Ts Series Tiny Slide Switches
Manufacturer
C&K Components
Datasheet
I
TS Series
Tiny Slide Switches
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
ELECTRICAL LIFE:
CONTACT RESISTANCE: Below 20 m Ω typ. initial @
INSULATION RESISTANCE: 10 9 Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC
SOLDERABILITY: Per MIL-STD-202F method 208D, or
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages I–9 and I–10. For additional options not shown in catalog, consult Customer Service Center. All models
have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
DC max. Q contact material (TS01 Model): 3 AMPS @ 120 V AC
or 28 V DC; (TS02, TS03 Models): 1 AMP @ 120 V AC or 28 V
DC. See page I-10 for additional ratings.
TS01 MODELS: 60,000 make-and-break cycles at full load.
TS02, TS03 MODELS: 30,000 cycles.
2-4 V DC, 100 mA, for both silver and gold plated contacts.
EIA RS-186E method 9 (1 hour steam aging).
Switch Function
TS01
TS02
TS03
SPDT On-None-On
SPST Off-None-On
SPDT On-Off-On
Features/Benefits
Reliable contact design ensures
long electrical life
Ratings up to 3 AMPS
Epoxy terminal-seal compatible
with bottom wash cleaning
RoHS compliant
Terminations
A
C
W
Contact Material
B
Q
G
P
S
R
Gold
Silver
Gold over silver
Gold, matte-tin
Silver, matte-tin
Gold over silver, matte-tin
Right angle, PC thru-hole
(TS01 & TS03 models only)
PC Thru-hole
Wire wrap
I–8
Materials
CASE: Glass filled nylon 4/6, flame retardant, heat stabilized.
ACTUATOR: Nylon, black standard.
HOUSING: Stainless steel or stainless steel, nickel plated.
END CONTACTS: B contact material: Copper alloy, with gold plate over
CENTER CONTACT & ALL TERMINALS: B contact material: Copper
TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical
NOTE: Any models supplied with Q, B, G, P, S or R contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
nickel plate. Q contact material: Coin silver, silver plated. See
page I-10 for additional contact materials.
alloy, with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See page I-10 for additional contact materials.
Data chapter.
Seal
E
F
Epoxy
Epoxy seal and splashproof RTV latex rubber seal
Typical Applications
Test & measurement equipment
Computers & peripherals
Telecommunications &
networking equipment
Specifications and dimensions subject to change
www.ck-components.com
Dimensions are shown: Inch (mm)
Models Available

Related parts for ts03wlf

Related keywords