LM95172EWG10A NSC [National Semiconductor], LM95172EWG10A Datasheet - Page 8

• Manufacturer Part Number: LM95172EWG10A
• Manufacturer: NSC [National Semiconductor]

30076606
FIGURE 4. Data Input Timing Diagram
30076609
FIGURE 5. t
Timing Definition Diagram
BUF
30076610
FIGURE 6. t
Timing Definition Diagram
TA
Note 1: “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of device reliability
and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or other conditions beyond those indicated in
the Operating Ratings is not implied. The Operating Ratings indicate conditions at which the device is functional and the device should not be operated beyond
such conditions.
Note 2: The Electrical characteristics tables list guaranteed specifications under the listed Operating Ratings except as otherwise modified or specified by the
Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and are not guaranteed.
Note 3: Typical values represent most likely parametric norms at specific conditions (Example Vcc; specific temperature) and at the recommended Operating
Conditions at the time of product characterizations and are not guaranteed.
Note 4: Specification is guaranteed by characterization and is not tested in production
Note 5: Specification is guaranteed by design and is not tested in production
Note 6: Invalid. The LM95172EWG will return a "0" if read. If written to, no valid register will be modified.
Note 7: Human body model, 100 pF discharged through a 1.5 kΩ resistor. Machine model, 200 pF discharged directly into each pin. The Charged Device Model
(CDM) is a specified circuit characterizing an ESD event that occurs when a device acquires charge through some triboelectric (frictional) or electrostatic induction
processes and then abruptly touches a grounded object or surface.
Note 8: The LM95172EWG will operate properly over the V
= 3.0V to 5.5V and V
= 3.0V to 5.5V supply voltage ranges.
DD ANALOG
DD IO
Note 9: Total Quiescent Current includes the sum of the currents into the V
and the V
pins.
DD ANALOG
DD IO
Note 10: This specification is provided only to indicate how often temperature data is updated. The LM95172EWG can be read at any time without regard to
conversion state (and will yield last conversion result). A conversion in progress will not be interrupted. The output shift register will be updated at the completion
of the read and a new conversion restarted.
www.national.com
8