RF600T-EVALR1 RFSOLUTIONS [rfsolutions.ltd], RF600T-EVALR1 Datasheet - Page 4

• Manufacturer Part Number: RF600T-EVALR1
• Description: Smart Radio Evaluation Kit
• Manufacturer: RFSOLUTIONS [rfsolutions.ltd]

DS605-2
The circuit diagram and circuit board have been designed to both flow from one side to the other. The
board may be split into the following sections
Radio Module Section,
Several radio modules may be used;
Many other modules may also be used, so long as the pin out is the same.
Each of these radio modules may be used in conjunction with the RF600T to provide part of a
radio communications system (transmitting or receiving) or in conjunction with the FM-RXQ1 as a
radio transceiver system.
RF600T
This area enables the RF600T to be used, A complete low power comms system can be used with
the RF600T in conjunction with any of the Radio modules Section above. In this area is also the
option links to enable the user to change the set-up parameters for the RF600T or TRXQ1 radio
transceiver module.
TRXQ1
The TRXQ1 provides a stand-alone solution to low power RS232 radio transceiver system (FM-
RXQ1 & RF600T combined). This is a complete solution, which removes the need for the RF600T.
Test Interface:
This area provides the interfaces that are needed to communicate with a host PC using a MAX232
IC. There are two DB9 connectors in this area, CON1 is for use with RF600T and TRXQ1 devices
while the CON2 connectors is used for the RF620 Smart Radio Modules. it is also the location for
the standard learn procedure switch.
Power Supply
The board may be powered from;
•
•
•
•
•
•
•
•
•
•
•
•
Radio Modules
TRXQ1 Smart Module
RF600T Encoder / Decoder
Test interface.
Power Supply.
FM-RXQ1-433 radio transceiver
FM-RTFQ1 Radio Transmitter
FM-RRFQ1 Radio Receiver
FM-RTFQ2 Radio Transmitter
FM-RRFQ2 Radio Receiver
25
th
FEB 2005
A PP3 battery for mobile use
A standard 2.5 mm power jack socket, which will accept a 9-15 volt dc supply.
Smart Radio Evaluation Kit
©2005 Reg. No. 227 4001, ENGLAND
Page 4
RF600T-EVAL