R5F21348KDFP RENESAS [Renesas Technology Corp], R5F21348KDFP Datasheet - Page 10

• Manufacturer Part Number: R5F21348KDFP
• Manufacturer: RENESAS [Renesas Technology Corp]

R8C/34K Group
R01DS0040EJ0100 Rev.1.00
Feb 25, 2011
Table 1.7
I: Input
USB
Reference voltage
input
A/D converter
Comparator B
I/O port
Item
O: Output
Pin Functions (2)
USB_DP/USB_DM
USB_VBUS
USB_VBUSEN
USB_OVRCURA/
USB_OVRCURB
USB_DPUPE
USB_VCC
USB_DPRPD/
USB_DRPD
USB_ID
USB_EXICEN
VREF
AN0 to AN11
ADTRG
IVCMP1, IVCMP3
IVREF1, IVREF3
P0_0 to P0_7,
P1_0 to P1_7,
P3_0, P3_3 to P3_5,
P3_7,
P4_3 to P4_7,
P6_0, P6_5 to P6_7,
P7_6, P7_7,
P8_0 to P8_3
Pin Name
I/O: Input and output
I/O Type
I/O
I/O
I/O
O
O
O
O
I
I
I
I
I
I
I
I
D+/D- I/O pins of the USB on-chip transceiver.
Connect these pins to the D+/D- pin of the USB bus.
USB cable connection monitor pin.
Connect this pin to VBUS of the USB bus. Whether VBUS is
connected or disconnected can be detected during operation
as a function.
VBUS (5 V) supply enable signal for external power supply
chip.
External overcurrent detection signal should be connected to
these pins. VBUS comparator signals should be connected
to these pins when the USB host power supply chip is
connected.
1.5 k Ω pull-up resistor control signal for USB D+ signal when
operating as a function controller.
USB power supply pin.
15 k Ω pull-down resistor control signals for USB D+ and D-
signals when operating as a host.
ID input signal for microAB or miniAB connector should be
connected when operating on OTG.
Low-power control signal for external power supply (OTG)
chip. Connect this pin to the OTG power supply IC to be
connected externally.
Reference voltage input pin to A/D converter.
Analog input pins to A/D converter.
AD external trigger input pin.
Comparator B analog voltage input pins.
Comparator B reference voltage input pins.
CMOS I/O ports. Each port has an I/O select direction
register, allowing each pin in the port to be directed for input
or output individually.
Any port set to input can be set to use a pull-up resistor or not
by a program.
Description
Page 10 of 58
1. Overview