D38999/49 Defense Supply Center, D38999/49 Datasheet - Page 46
D38999/49
Manufacturer Part Number
D38999/49
Description
D38999K / D38999J 500 Cycle Contact
Manufacturer
Defense Supply Center
Datasheet
1.D3899949.pdf
(111 pages)
- Current page: 46 of 111
- Download datasheet (686Kb)
subjected to the following water absorption test (connectors shall be unplated).
specified in ASTM D570-81 for long-term immersion.
specified in ASTM D570-81 for boiling water immersion.
test procedure 79 of EIA-364 .
clamps shall be tested as specified in method 2015 of MIL-STD-1344. The following conditions apply.
subjected to test procedure 78 of EIA-364 .
contract or order (see 6.2). When actual packaging of a materiel is to be performed by DoD personnel,
these personnel need to contact the responsible packaging activity to ascertain requisite packaging
requirements. Packaging requirements are maintained by the Inventory Control Point's packaging activity
within the Military Department or Defense Agency, or within the Military Department's System Command.
Packaging data retrieval is available from the managing Military Department's or Defense Agency's
automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.
mandatory.)
(This section contains information of a general or explanatory nature that may be helpful, but is not
4.5.44 Hydrolytic stability (classes J and M) (see 3.48). Mated connectors less inserts shall be
4.5.44.1 Hydrolytic stability (initial qualification). The connectors shall be subjected to the test as
4.5.44.2 Hydrolytic stability (periodic inspection). The connectors shall be subjected to the test as
4.5.45
4.5.46 Impact (classes J and M) (see 3.50). Connector plugs with MIL-C-85049 straight strain relief
4.5.47 Cavity to cavity insert bonding integrity (see 3.51). Unmated, unwired connectors shall be
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the
6. NOTES
6.1 Intended use. The various configurations of the connectors are intended for use as follows:
a. Series I connectors: General application within weapon system where a quick disconnect
a. Drop height shall be 4 feet (1.829).
b. Number of drops shall be 8.
c. Plate shall be indexed at 36 intervals.
d. Plugs shall have no caps or covers installed.
coupling system is required for blind mating or other mating problem areas. These connectors
provide high-vibration characteristics and are suitable for severe wind and moisture problem
(SWAMP) areas with proper connector accessories.
Insert bonding integrity (see 3.49). Unmated, unwired connectors shall be subjected to
Class G, finish F - Provides a conductive shell for EMI considerations but with additional
requirements for space grade applications.
Class H - Same as class Y but with additional requirements for space grade applications.
Class T, finish F - Provides a conductive shell for EMI considerations.
Class Y - Applications where pressure must be maintained.
Classes R, U and X - Applications requiring high corrosion resistance.
MIL-DTL-38999K
46
Related parts for D38999/49
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Military Spec Transistors, PNP Germanium, High Power
Manufacturer:
Defense Supply Center Columbus
Part Number:
Description:
Radiation hardened D.I., high speed, low power, current feedback amplifier with programmable output limiting
Manufacturer:
Defense Electronics Supply Center
Part Number:
Description:
Radiation hardened D.I., ultra high speed current feedback amplifier with offset adjust
Manufacturer:
Defense Electronics Supply Center
Part Number:
Description:
Radiation hardened D.I., low power, current feedback video operational amplifier with output disable
Manufacturer:
Defense Electronics Supply Center
Part Number:
Description:
Radiation hardened D.I., dual, high speed, low power, video closed loop buffer
Manufacturer:
Defense Electronics Supply Center
Part Number:
Description:
Microcircuits, Digital, CMOS Dual, Retriggerable/Resettable Monostable Multivibrator, Monolithic Silicon
Manufacturer:
Defense Electronics Supply Center
Part Number:
Description:
7.5V, 10Wt General purpose voltage reference/regulator diode
Manufacturer:
Defense Electronics Supply Center
Part Number:
Description:
6.8V, 400mWt General purpose voltage reference/regulator diode
Manufacturer:
Defense Electronics Supply Center
Part Number:
Description:
300mA Iout, 100V Vrrm Fast Recovery Rectifier
Manufacturer:
Defense Electronics Supply Center
Part Number:
Description:
500mA Iout, 50V Vrrm Fast Recovery Rectifier
Manufacturer:
Defense Electronics Supply Center
Part Number:
Description:
150mA Iout, 75V Vrrm Fast Recovery Rectifier
Manufacturer:
Defense Electronics Supply Center
Part Number:
Description:
1.0A Iout, 200V Vrrm General Purpose Silicon Rectifier
Manufacturer:
Defense Electronics Supply Center