EVAL01-HMC830LP6GE HITTITE [Hittite Microwave Corporation], EVAL01-HMC830LP6GE Datasheet - Page 9

• Manufacturer Part Number: EVAL01-HMC830LP6GE
• Description: FRACTIONAL-N PLL WITH INTEGRATED VCO 25 - 3000 MHz
• Manufacturer: HITTITE [Hittite Microwave Corporation]

7 - 9
7
Pin Descriptions
For price, delivery, and to place orders: Hittite Microwave Corporation,20 Alpha Road, Chelmsford, MA 01824
11 - 14, 18 - 22, 24,
26, 34, 37, 38
Pin Number
2, 5, 6, 8, 9,
10
15
16
17
23
25
27
28
29
30
31
32
33
35
36
39
40
1
3
4
7
Phone: [phone]
Application Support: Phone: [phone] or [e-mail]
DVDD3V
LD_SDO
Function
RF_N
RF_P
VTUNE
VCCHF
VCCPS
VCCPD
VPPCP
VDDLS
XREFP
AVDD
RVDD
VCC2
VCC1
BIAS
CEN
SEN
SCK
N/C
SDI
CP
[1]
[1]
v00.0311
Fax: [phone]
FRACTIONAL-N PLL WITH INTEGRATED VCO
drive an external load. Must be measured with 10GΩ meter such as Agilent 34410A,
Note: 1.920V ±20mV reference voltage (BIAS) is generated internally and cannot
Lock Detect, or Serial Data, or General Purpose (CMOS) Logic Output (GPO)
was measured with these pins connected to RF/DC ground externally.
The pins are not connected internally; however, all data shown herein
Chip Enable. Connect to logic high for normal operation.
External bypass decoupling for precision bias circuits.
Power Supply for the charge pump digital section
Power Supply for charge pump analog section
DC Power Supply for Digital (CMOS) Circuitry
PLL Serial Port Enable (CMOS) Logic Input
PLL Serial Port Clock (CMOS) Logic Input
Order On-line at www.hittite.com
PLL Serial Port Data (CMOS) Logic Input
normal 10MΩ DVM will read erroneously.
DC Power Supply for Analog Prescaler
DC Power Supply for Analog Circuitry
DC Power Supply for analog circuitry.
DC Power Supply for Phase Detector
VCO Varactor. Tuning Port Input.
Reference Oscillator Input
VCO Analog Supply 2
VCO Analog Supply 1
Charge Pump Output
RF Negative Output
RF Positive Output
Reference Supply
Description
HMC830LP6GE
25 - 3000 MHz