EC31 ECLIPTEK [Ecliptek Corporation], EC31 Datasheet - Page 4

• Manufacturer Part Number: EC31
• Description: OSCILLATOR
• Manufacturer: ECLIPTEK [Ecliptek Corporation]

MARKING SPECIFICATIONS
ECLIPTEK CORP.
MANUFACTURER
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Line 1: ECLIPTEK
Line 2: EC31
Line 3: XX.XXX M
Line 4: XX Y ZZ
Note: Pin 1 shall be designated with a dot
FREQUENCY TOLERANCE / STABILITY
00=±100ppm Maximum (Standard)
45=±50ppm Maximum, 25=±25ppm Maximum
20=±20ppm Maximum
PACKAGE
HS=Half Size 8 Pin DIP
DUTY CYCLE
Blank=50 ±10(%) (Standard), T=50 ±5(%)
FREQUENCY DEVIATION
Blank=±50ppm Minimum (Standard)
A=±100ppm Minimum
B=±150ppm Minimum
800-ECLIPTEK www.ecliptek.com for latest revision
OSCILLATOR
Series Designator
Frequency in MHz
(5 Digits Maximum + Decimal)
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
CATEGORY
Pin 1: Control Voltage (V
Pin 4: Case Ground
c
)
SERIES
EC31
EC31 00 HS T A 15 ET - 24.000M - G TR
Pin 5: Output
Pin 8: Supply Voltage
PART NUMBERING GUIDE
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Characteristic
Seal Integrity
Solderability
Marking Permanency
Shock
Vibration
8 pin DIP
PACKAGE
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Specifications subject to change without notice.
Specification
Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds minimum.
Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage.
10 Strokes with brush after 1 minute soak in solvent, 3 times.
Random drop on hard wooden plate 3 times from a height of 20cm.
Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz
within 1 minute (approximately) for 2 hours minimum on each axis
(X, Y and Z) for a total of 6 hours.
VOLTAGE
5.0V
PACKAGING OPTIONS
Blank=Bulk (Standard)
TR=Tape & Reel (only offered with
Half Size G and Half Size G2 Options)
AVAILABLE OPTIONS
Blank=None (Standard)
CLXXX=Custom Lead Length (See Page 133)
G=Half Size Gull Wing (See Page 132)
G2=Alternate Half Size Gull Wing (See Page 132)
FREQUENCY
OPERATING TEMP. RANGE
Blank=0°C to 70°C (Standard)
ET=-40°C to 85°C
LINEARITY
Blank=20% Maximum(Standard)
05=5% Maximum, 10=10% Maximum
15=15%Maximum
CLASS
OS18
Pin 1 Locator for Gull Wing
(1) For “G” Option (2) For “G2” Option
250 Pieces Per Reel
Compliant to EIA-481A
REV
08/06
.
DATE