ICX239

Manufacturer Part NumberICX239
DescriptionDiagonal 3mm (Type 1/6) CCD Image Sensor for PAL Color Cameras
ManufacturerSONY [Sony Corporation]
ICX239 datasheet
 
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
6
Page 6
7
Page 7
8
Page 8
9
Page 9
10
Page 10
11
12
13
14
15
16
17
Page 1/17

Download datasheet (186Kb)Embed
Next
Diagonal 3mm (Type 1/6) CCD Image Sensor for PAL Color Cameras
Description
The ICX239AKE is an interline CCD solid-state
image sensor suitable for PAL small color cameras.
High resolution is achieved through the use of Ye,
Cy, Mg, and G complementary color mosaic filters.
This chip features a field period readout system and
an electronic shutter with variable charge-storage time.
The package is a small 12-pin SON(LCC).
Features
• High sensitivity and low smear
• Horizontal register:
3.3 to 5.0V drive
• Reset gate:
3.3 to 5.0V drive
• No voltage adjustment
(Reset gate and substrate bias are not adjusted.)
• Low dark current and excellent antiblooming characteristics
• Continuous variable-speed shutter
• Recommended range of exit pupil distance: –10mm to – ∞
• Ye, Cy, Mg, and G complementary color mosaic filters on chip
• 12-pin ceramic SON(LCC) package
Device Structure
• Interline CCD image sensor
• Image size:
• Number of effective pixels:
• Total number of pixels:
• Chip size:
• Unit cell size:
• Optical black:
• Number of dummy bits:
• Substrate material:
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
Diagonal 3mm (Type 1/6)
752 (H)
582 (V) approx. 440K pixels
795 (H)
596 (V) approx. 470K pixels
3.30mm (H)
2.95mm (V)
3.275µm (H)
3.150µm (V)
Horizontal (H) direction: Front 3 pixels, rear 40 pixels
Vertical (V) direction:
Front 12 pixels, rear 2 pixels
Horizontal 22
Vertical 1 (even fields only)
Silicon
– 1 –
ICX239AKE
12 pin SON (Ceramic)
Pin 1
V
3
H
40
Pin 7
Optical black position
(Top View)
E98X20A99-PS
2
12

ICX239 Summary of contents

  • Page 1

    ... Diagonal 3mm (Type 1/6) CCD Image Sensor for PAL Color Cameras Description The ICX239AKE is an interline CCD solid-state image sensor suitable for PAL small color cameras. High resolution is achieved through the use of Ye, Cy, Mg, and G complementary color mosaic filters. This chip features a field period readout system and an electronic shutter with variable charge-storage time ...

  • Page 2

    ... Horizontal register transfer clock 1 H Horizontal register transfer clock 2 Ratings Unit – –50 to +15 V –50 to +0.3 V –40 to +0.3 V –0.3 to +20 V –10 to +18 V – –0.3 to +28 V –0 +15 V – –14 to +14 V –30 to +80 °C –10 to +60 °C ICX239AKE Remarks 1 ...

  • Page 3

    ... V VL VL3 – High-level coupling V 2 High-level coupling V 2 Low-level coupling V 2 Low-level coupling Input through 0.1µ capacitance V 4 Low-level coupling V 4 Low-level coupling V 5 ICX239AKE L )/2 VH2 )/2 VL4 ...

  • Page 4

    ... V23 C V13 Horizontal transfer clock equivalent circuit C RG – 4 – Min. Typ. Max. Unit 680 pF 220 180 pF Ω 120 Ω 15 Ω 15 Ω ICX239AKE Remarks H 2 ...

  • Page 5

    ... twh VHH V VHL V VHL V VL3 VHL V VLH V VLL V VL4 – 5 – VHH VHH V VHL V VH3 V VLL VHH VHH VHL V VHL V VH4 V VLH V VL ICX239AKE V VLH ...

  • Page 6

    ... CCD) tr twh twl Point A is the minimum value of the coupling waveform during the period from RGLL . RGLm V SUB 0% tr twh tf – 6 – ICX239AKE twl tr twh tf V RGH RGL is the average value of V RGL RGLH and ...

  • Page 7

    ... H two Min. Typ – 7 – Unit Remarks 0.5 0.5 µs 15 250 ns 6.5 9.5 6.5 9.5 ns 6.5 9.5 6.5 9.5 0.01 0.01 µs 0.01 0. µs 0.5 0.5 ) for the H rising side of the Unit Remarks Max and H is two ICX239AKE During readout 1 2 During drain charge and ...

  • Page 8

    ... Y signal output LPF1 (3dB down 6.3MHz LPF2 S H (3dB down 1MHz) – 8 – Unit Measurement method Chroma signal output ICX239AKE (Ta = 25°C) Remarks Ta = 60°C Zone 0 and I Zone 60°C ...

  • Page 9

    ... As shown in the left figure, fields are read out. The charge is Ye mixed by pairs such as A1 and A2 in the A field. (pairs such the B field result, the sequence of charges output as signals from Ye the horizontal shift register (Hreg) is, for line A1 Cy ( Cy), and (Mg + Ye). Hreg 1/2 1/2 – 9 – ICX239AKE ...

  • Page 10

    ... Y signal and substitute the values into the following formula. SHy = (Ymax – Ymin)/200 2 , color temperature of 3200K halogen source subject. (Pattern Mg [mV]) at the center of the screen with frame readout Cy 100 [%] (1/10V method conversion value) 100 [%] – 10 – [mV]) and G signal output (S [mV]), and Ye G ICX239AKE ...

  • Page 11

    ... R, G, and B filters and measure the difference between Y signal lines for the same field (∆Ylw, ∆Ylr, ∆Ylg, ∆Ylb [mV]). Substitute the values into the following formula. Lci = (∆Yli/200) 100 [%] ( 100 [%] 100 [%] – 11 – ICX239AKE ...

  • Page 12

    ... ICX239AKE ...

  • Page 13

    ... Spectral Sensitivity Characteristics (excludes both lens characteristics and light source characteristics) 1.0 0.8 0.6 0.4 0.2 0.0 400 450 Sensor Readout Clock Timing Chart V1 V2 Odd Field Even Field 500 550 600 Wave Length [nm] 2.6 1.5 2.6 2.6 2.6 33.6 0.2 – 13 – ICX239AKE 650 700 Unit: µs ...

  • Page 14

    ... ICX239AKE ...

  • Page 15

    ... ICX239AKE ...

  • Page 16

    ... For continuous using under cruel condition exceeding the normal using condition, consult our company. b) Exposure to high temperature or humidity will affect the characteristics. Accordingly avoid storage or usage in such conditions. – 16 – ICX239AKE ...

  • Page 17

    ... ICX239AKE ...