62101059-000 Schaevitz Sensors, 62101059-000 Datasheet - Page 2

• Manufacturer Part Number: 62101059-000
• Description: Pto1a-10-6p
• Manufacturer: Schaevitz Sensors

CORE CONNECTING RODS
LVDT installation requires a connecting rod between the LVDT core and the moving object being measured. Connecting
rods made of magnetized, ferromagnetic, or high conductivity metals (Aluminum, Brass, Copper, etc.) must not be used as
they interfere with the LVDT operation. Connecting rods made of plastic or other non-conductive materials are acceptable.
One must be extremely careful when attaching a core to a rod, as the core is a very sensitive part. It is annealed for the
highest permeability and it makes this Nickel alloy part “soft” (easy to bend or stress). Any excessive stress, high heat, or
physical damage would significantly affect the LVDT performance. Cores must be installed only hand tight and caution must
be applied to avoid bending. Thread-locker adhesive can be applied. Cores must never be welded or crimped.
Measurement Specialties has a large selection of very high-quality connecting rods. Our connecting rods are fabricated from
AISI 300 Series austenitic (non-ferromagnetic) stainless steel to prevent distortion of the LVDT magnetic field. They are
threaded end to end. To order, check the thread size of the core for the LVDT you are using and select the part number in
the table below function of the length you need:
PSD 4-15 DUAL RAIL POWER SUPPLY FOR DC LVDTS
The PSD 4-15 power supply is designed for optimum operation of our DC LVDTs
(DC-EC and HCD Series). The output voltage is ±15VDC with 115 to 230VAC, 47 to
63 Hertz power input. The current capability is 100mA continuous and it can operate
up to four (4) DC LVDTs (DC-EC, or HCD, or a combination). This DIN standard rail
mount power supply is CE certified and UL listed.
Refer to the data sheet for detailed information on this device.
GAGE HEAD INSTRUMENTATION FOR AC LVDTS
Measurement Specialties offers a comprehensive selection of CE
certified signal conditioners, panel displays and mini-controllers
with voltage, current loop and digital outputs. These products are
suitable for the most rigorous OEM, factory automation, process
controls, materials testing, metrology and many other applications.
Data sheets and manuals can be downloaded from our web site at:
http://www.meas-spec.com/position-sensors/position-sensor-
instrumentation/lvdt-signal-conditioning.aspx
LVDT Accessories
Length
inch
Accessories for LVDTs
12
24
36
6
1-72 UNF-2B
Thread size
05282945-006
05282945-012
05282945-024
05282945-036
Part Number
Length
inch
12
24
36
6
Thread size
40 UNC-2B
05282946-006
05282946-012
05282946-024
05282946-036
Part Number
Part Number: 02291331-000
Length
inch
12
24
36
6
6-40 UNF-2B
Thread size
05282947-006
05282947-012
05282947-024
05282947-036
Part Number
Length
inch
12
6
www.meas-spec.com
Length
152.4
304.8
mm
Thread size
M2x0.4-6H
2/3
05282976-006
05282976-012
Part Number
Length
inch
12
6
Length
152.4
304.8
Thread size
M3x0.5-6H
mm
05282977-006
05282977-012
Part Number
Length
inch
12
6
Length
152.4
304.8
mm
Thread size
M4x0.7-6H
2010-december
05282978-006
05282978-012
Part Number