SiT8002AI-13-18E-25.00000X SiTime, SiT8002AI-13-18E-25.00000X Datasheet - Page 7

• Manufacturer Part Number: SiT8002AI-13-18E-25.00000X
• Description: Programmable Oscillators 25MHz +/-50ppm 1.8V +/-5%
• Manufacturer: SiTime
• Series: SiT8002r

Specifications of SiT8002AI-13-18E-25.00000X

• Rohs: yes
• Package / Case: 2.5 mm x 2 mm
• Frequency: 25 MHz
• Frequency Stability: 50 PPM
• Supply Voltage: 1.8 V
• Load Capacitance: 15 pF
• Termination Style: SMD/SMT
• Output Format: CMOS
• Minimum Operating Temperature: - 40 C
• Maximum Operating Temperature: + 85 C
• Dimensions: 2 mm W x 2.5 mm L x 0.75 mm H
• Mounting Style: SMD/SMT
• Product: Programmable
• Supply Voltage - Max: 1.9 V
• Supply Voltage - Min: 1.7 V

Package Information
7.0 x 5.0 x 0.90mm
Rev. 1.43
SiT8002
Dimension (mm)
© SiTime Corporation 2009. The information contained herein is subject to change at any time without notice. SiTime assumes no responsibility or liability for any loss, damage or defect of
a Product which is caused in whole or in part by (i) use of any circuitry other than circuitry embodied in a SiTime product, (ii) misuse or abuse including static discharge, neglect or accident,
(iii) unauthorized modification or repairs which have been soldered or altered during assembly and are not capable of being tested by SiTime under its normal test conditions, or (iv) improper
installation, storage, handling, warehousing or transportation, or (v) being subjected to unusual physical, thermal, or electrical stress.
Disclaimer: sitime makes no warranty of any kind, express or implied, with regard to this material, and specifically disclaims any and all express or implied warranties, either in fact or by
operation of law, statutory or otherwise, including the implied warranties of merchantability and fitness for use or a particular purpose, and any implied warranty arising from course of dealing
or usage of trade, as well as any common-law duties relating to accuracy or lack of negligence, with respect to this material, any sitime product and any product documentation. products sold
by sitme are not suitable or intended to be used in a life support application or component, to operate nuclear facilities, or in other mission critical applications where human life may be involved
or at stake. all sales are made conditioned upon compliance with the critical uses policy set forth below.
CRITICAL USE EXCLUSION POLICY
BUYER AGREES NOT TO USE SITIME'S PRODUCTS FOR ANY APPLICATION OR IN ANY COMPONENTS USED IN LIFE SUPPORT DEVICES OR TO OPERATE NUCLEAR FACILITIES
OR FOR USE IN OTHER MISSION-CRITICAL APPLICATIONS OR COMPONENTS WHERE HUMAN LIFE OR PROPERTY MAY BE AT STAKE.
SiTime owns all rights, title and interest to the intellectual property related to SiTime's products, including any software, firmware, copyright, patent, or trademark. The sale of SiTime products
does not convey or imply any license under patent or other rights.
the sale of products or services by SiTime. Unless otherwise agreed to in writing by SiTime, any reproduction, modification, translation, compilation, or representation of this material shall be
strictly prohibited.
5. Y top marking denotes manufacturing origin. The value of “Y” will depend on the assembly location of the device.
6. XXXXdenotes manufacturing lot number.
7. A capacitor of value 0.1µF between VDD and GND is recommended.
1 to 125 MHz Programmable Oscillator
YXXXX
0 . 9 0 ± 0 . 1 5
(continued)
Do not Connect the center pad
Connect it to Device’s GND
[5,6]
SiTime retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to
or
Page 7 of 7
Land Pattern (recommended) (mm)
[7]
www.sitime.com