STM8L152K6T3 STMicroelectronics, STM8L152K6T3 Datasheet - Page 127

• Manufacturer Part Number: STM8L152K6T3
• Description: 8-bit Microcontrollers - MCU 8-bit Ultralow MCU LCD 32pin 32kb Flash
• Manufacturer: STMicroelectronics

Specifications of STM8L152K6T3

• Product Category: 8-bit Microcontrollers - MCU
• Rohs: yes
• Core: STM8
• Data Bus Width: 8 bit

STM8L151xx, STM8L152xx
Table 69.
06-Sep-2011
11-Mar-2011
Date
Document revision history
Revision
6 cont’d
7
Doc ID 15962 Rev 12
Modified OPT1 and OPT4 description in
description on page
Updated
I/Os” replaced with “high sink I//Os”.
Updated R
on page
Added Tape & Reel option to
ordering information scheme on page
Features: updated bullet point concerning capacitive sensing
channels.
Section 3.1: Low power
definitions.
Section 3.4: Clock
‘System clock sources bullet point’.
Section 3.12: System configuration controller and routing
replaced last sentence concerning management of charge transfer
acquisition sequence.
Added
Section 3.19: Development
Table 5: Medium density STM8L15x pin
to second column (same pinout as UFQFPN32); “Timer X - trigger”
replaced by “Timer X - external trigger”; added note at the end of
this table concerning the slope control of all GPIO pins.
Table 11: Interrupt
some of the source blocks and descriptions.
Section 7: Option
by UM0470.
Table 13: Option byte
setting (0xAA) for OPT0.
NRST
Recommended NRST pin configuration on page
Table 47: TS
parameter T
Table 48: Comparator 1
‘Comparator offset error’; added footnote
Table 49: Comparator 2
V
Table 50: DAC
voltage (DACOUT buffer ON).
Section 9.3.14: 12-bit ADC1
Replaced
outline
(dimensions in
Figure 52: Medium density STM8L15x ordering information
removed ‘TR = Tape & Reel”.
offset
, I
pin: updated text above
Section 3.13: Touchsensing
and
COMP2
103.
Section 9: Electrical parameters on page 53
Figure 44: UFQFPN48 7 x 7 mm, 0.5 mm pitch, package
HN and
Figure 45: UFQFPN48 7 x 7 mm recommended footprint
S_TEMP
characteristics: removed typ and max values for the
; added footnotes
characteristics: updated max value for DAC_OUT
mm).
R
bytes: replaced PM0051 by PM0054 and UM0320
management: added ‘kHz’ to 32.768 in the
mapping: merged footnotes 1 and 2; updated
HN
; added min value for same.
50.
description: replaced the factory default
descriptions in
modes: updated Wait mode and Halt mode
characteristics: added typ value for
characteristics: updated t
support: updated the Bootloader.
characteristics: updated.
Changes
Figure 52: Medium density STM8L15x
Figure
1.
and
Table 45: LCD characteristics
33; updated
123.
3.
description: added LQFP32
Table 12: Option byte
1.
94.
Revision history
START
Figure 33:
“standard
, t
dslow
interface:
scheme:
127/129
, t
dfast
,