MC33201VDR2 ON Semiconductor, MC33201VDR2 Datasheet - Page 18

• Manufacturer Part Number: MC33201VDR2
• Description: Operational Amplifiers - Op Amps ANA LO-V/R-R SNGL OA
• Manufacturer: ON Semiconductor

Specifications of MC33201VDR2

• Product Category: Operational Amplifiers - Op Amps
• Number Of Channels: 1
• Common Mode Rejection Ratio (min): 60 dB
• Input Offset Voltage: 13 mV
• Input Bias Current (max): 200 nA
• Operating Supply Voltage: 1.8 V to 12 V, +/- 0.9 V to +/- 6 V
• Mounting Style: SMD/SMT
• Package / Case: SOIC-8
• Slew Rate: 1 V/us
• Shutdown: No
• Output Current: 80 mA
• Maximum Operating Temperature: + 125 C
• Amplifier Type: Low Voltage Amplifier
• Gain Bandwidth Product: 2.2 MHz
• Maximum Dual Supply Voltage: +/- 6 V
• Minimum Dual Supply Voltage: +/- 0.9 V
• Minimum Operating Temperature: - 55 C
• Factory Pack Quantity: 2500
• Supply Current: 0.9 mA
• Technology: Bipolar
• Voltage Gain Db: 109.54 dB

PUBLICATION ORDERING INFORMATION
Micro8 is a trademark of International Rectifier.
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [e-mail]
SEATING
PLANE
−T−
ON Semiconductor and
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
14
1
G
−A−
D
14 PL
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
0.25 (0.010)
M
*For additional information on our Pb−Free strategy and soldering
8
7
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
−B−
0.58
T
14X
K
B
S
C
P
7 PL
A
S
0.25 (0.010)
N. American Technical Support: 800−282−9855 Toll Free
Europe, Middle East and Africa Technical Support:
Japan Customer Focus Center
PACKAGE DIMENSIONS
SOLDERING FOOTPRINT*
USA/Canada
Phone: [phone]
Phone: 81−3−5817−1050
R
http://onsemi.com
1
X 45
CASE 751A−03
_
M
SOIC−14
ISSUE J
M
7.04
7X
B
18
M
DIMENSIONS: MILLIMETERS
J
1.52
14X
F
1.27
PITCH
NOTES:
1. DIMENSIONING AND TOLERANCING PER
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS A AND B DO NOT INCLUDE
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
5. DIMENSION D DOES NOT INCLUDE
ANSI Y14.5M, 1982.
MOLD PROTRUSION.
PER SIDE.
DAMBAR PROTRUSION. ALLOWABLE
DAMBAR PROTRUSION SHALL BE 0.127
(0.005) TOTAL IN EXCESS OF THE D
DIMENSION AT MAXIMUM MATERIAL
CONDITION.
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
DIM
G
M
A
B
C
D
F
J
K
P
R
MILLIMETERS
MIN
8.55
3.80
1.35
0.35
0.40
0.19
0.10
5.80
0.25
1.27 BSC
0
_
MAX
8.75
4.00
1.75
0.49
1.25
0.25
0.25
6.20
0.50
7
_
0.337
0.150
0.054
0.014
0.016
0.008
0.004
0.228
0.010
MIN
0.050 BSC
0
INCHES
_
0.344
0.157
0.068
0.019
0.049
0.009
0.009
0.244
0.019
MC33201/D
MAX
7
_