APSDM016GD5AN-ACW Apacer, APSDM016GD5AN-ACW Datasheet - Page 9

• Manufacturer Part Number: APSDM016GD5AN-ACW
• Description: Solid State Drives - SSD SDM4 7P/90D SATA DISK MOD SLC 16GB ET
• Manufacturer: Apacer

Specifications of APSDM016GD5AN-ACW

• Rohs: yes
• Product: SATA Disk Modules
• Memory Size: 16 GB
• Sustained Read: 43 MB/s
• Sustained Write: 42 MB/s
• Active Mode Current: 190 mA
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 85 C
• Connector Type: 7-Pin Signal, 2-Pin Power
• Dimensions: 30 mm x 20 mm x 1 mm
• Minimum Operating Temperature: - 40 C

4.2 Environmental Specifications
Environmental specification of SDM4 product family which follows the MIL-STD-202 and MIL-STD-810
standards is available as shown in Table 4-3.
4.3 Mean Time Between Failures (MTBF)
Mean Time Between Failures (MTBF) is predicted based on reliability data for the individual components
in SDM4. Although many component MTBFs are given in databases and often these values are not really
accurate, the prediction result for SDM4 is more than 2,000,000 hours.
Notes about the MTBF:
The MTBF is predicated and calculated based on “Telcordia Technologies Special Report, SR-332, Issue
2” method.
4.4 Certification and Compliance
SDM4 complies with the following standards:
© 2012 Apacer Technology Inc.






CE – EN55022/55024
FCC 47CFR Part15 Class B
RoHS
MIL-STD-202 and MIL-STD-810
SATA II (SATA Rev. 2.6)
Up to ATA/ATAPI-7 ( including S.M.A.R.T.)
operating temp.
non-operating temp.
humidity
operating vibration
non-operating vibration
operating shock
non-operating shock
Item
Table 4-3 SDM4 environmental specifications
APSDMxxxxX5AN-AXXX
SATA-Disk Module 4
0~70℃ (standard); -40 ~ +85 ℃ (extended)
-40~100(℃)
10~95% R.H, non-condensing
10~2000(Hz), 15(G), sine wave, 1(hr)/per axis
20~2000(Hz), 7.7(Grms), random wave, 1(hr)/per axis
50(G), 11(ms), half-sine wave
1500(G), 0.5(ms), half-sine wave
8
Specification
Rev. 1.1