AP-SAFD254QA032GS-ETHT Apacer, AP-SAFD254QA032GS-ETHT Datasheet - Page 21

• Manufacturer Part Number: AP-SAFD254QA032GS-ETHT
• Description: Solid State Drives - SSD SAFD 254 SATA FLASH DRIVE SLC 32GB EXT
• Manufacturer: Apacer

Specifications of AP-SAFD254QA032GS-ETHT

• Rohs: yes
• Product: SATA Flash Drives
• Memory Size: 32 GB
• Sustained Read: 163 MB/s
• Sustained Write: 53 MB/s
• Active Mode Current: 400 mA
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 70 C
• Connector Type: 7-pin signal, 15-pin power
• Dimensions: 100 mm x 69.85 mm x 9.3 mm
• Minimum Operating Temperature: 0 C

2.1.16 Security Freeze Lock (F5h)
Causes the drive to enter Frozen mode. Once this command has been executed, the following commands to
update a lock result in the Aborted Command error:
The drive exits from Frozen mode upon a power-off or hard reset. If the SECURITY FREEZE LOCK command
is issued when the drive is placed in Frozen mode, the drive executes the command, staying the Frozen mode.
2.1.17 Security Set Password (F1h)
This command sets user password or master password. The host outputs sector data with PIO data-out
protocol to indicate the information defined in the following table.
2.1.18 Security Unlock (F2h)
This command disables LOCKED MODE of the device. This command transfers 512 byte of data from the
host with PIO data-out protocol. The following table defines the content of this information.
2.1.19 Seek (7xh)
This command is effectively a NOP command to the device although it does perform a range check.
2.1.20 Set Features (EFh)
This command set parameter to Features register and set drive’s operation. For transfer mode, parameter is
set to Sector Count register. This command is used by the host to establish or select certain features.
2.1.21 Set Multiple Mode (C6h)
This command enables the device to perform READ MULTIPLE and WRITE MULTIPLE operations and
establishes the block count for these commands.
2.1.22 Sleep (E6h)
This command causes the device to set BSY, enter the Sleep mode, clear BSY and generate an interrupt.
©2011 Apacer Technology Inc.
SECURITY SET PASSWORD
SECURITY UNLOCK
SECURITY DISABLE PASSWORD
SECURITY ERASE PREPARE
SECURITY ERASE UNIT
Value
02h
03h
55h
82h
AAh
Features register Value and settable operating mode
Function
Enable write cache
Set transfer mode based on value in Sector Count register.
Disable read look-ahead feature
Disable write cache
Enable read look-ahead feature
AP-SAFD254QAxxxxS-XXHT
Serial ATA Flash Drive
20
Rev. 1.5