AP-FD18A20C0032GS-DSM Apacer, AP-FD18A20C0032GS-DSM Datasheet - Page 8

• Manufacturer Part Number: AP-FD18A20C0032GS-DSM
• Description: Solid State Drives - SSD AFD18M-M ATA FLASH DRIVE MLC 32GB
• Manufacturer: Apacer

Specifications of AP-FD18A20C0032GS-DSM

• Rohs: yes
• Product: ATA Flash Drives
• Memory Size: 32 GB
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 70 C
• Dimensions: 54 mm x 32 mm x 4.4 mm
• Minimum Operating Temperature: 0 C

ATA Flash Drive
AP-FD18A20CxxxxxS-XXX
5.1 Intelligent Endurance Design
5.1.1 Advanced wear-leveling algorithms
The NAND flash devices are limited by a certain number of write cycles. When using a file system,
frequent file table updates is mandatory. If some area on the flash wears out faster than others, it would
significantly reduce the lifetime of the whole device, even if the erase counts of others are far from the
write cycle limit. Thus, if the write cycles can be distributed evenly across the media, the lifetime of the
media can be prolonged significantly. The scheme is achieved both via buffer management and Apacer-
specific advanced wear leveling to ensure that the lifetime of the flash media can be increased, and the
disk access performance is optimized as well.
5.1.2 S.M.A.R.T. technology
S.M.A.R.T. is an acronym for Self-Monitoring, Analysis and Reporting Technology, an open standard
allowing disk drives to automatically monitor their own health and report potential problems. It protects the
user from unscheduled downtime by monitoring and storing critical drive performance and calibration
parameters. Ideally, this should allow taking proactive actions to prevent impending drive failure. Apacer
SMART feature adopts the standard SMART command B0h to read data from the drive. When the Apacer
SMART Utility running on the host, it analyzes and reports the disk status to the host before the device is
in critical condition.
5.1.3 Built-in hardware ECC
The ATA-Flash Drive uses BCH Error Detection Code (EDC) and Error Correction Code (ECC) algorithms
which correct up to twelve random single-bit errors for each 512-byte block of data. High performance is
fulfilled through hardware-based error detection and correction.
5.1.4 Enhanced data integrity
The properties of NAND flash memory make it ideal for applications that require high integrity while
operating in challenging environments. The integrity of data to NAND flash memory is generally
maintained through ECC algorithms and bad block management. Flash controllers can support up to 8
bits ECC capability for accuracy of data transactions, and bad block management is a preventive
mechanism from loss of data by retiring unusable media blocks and relocating the data to the other blocks,
along with the integration of advanced wear leveling algorithms, so that the lifespan of device can be
expanded.
7
© 2011 Apacer Technology Inc.
Rev. 1.0