AP-SDM002GABANS-ETT Apacer, AP-SDM002GABANS-ETT Datasheet - Page 4

• Manufacturer Part Number: AP-SDM002GABANS-ETT
• Description: Solid State Drives - SSD SDM3 7P/180D SATA DISK MOD SLC 2GB ET
• Manufacturer: Apacer

Specifications of AP-SDM002GABANS-ETT

• Rohs: yes
• Product: SATA Disk Modules
• Memory Size: 2 GB
• Sustained Read: 30 MB/s
• Sustained Write: 10 MB/s
• Active Mode Current: 205 mA
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 85 C
• Connector Type: 7-pin signal, 2-pin power
• Dimensions: 50.1 mm x 17 mm
• Minimum Operating Temperature: - 40 C

SATA-Disk Module 3
AP-SDMxxxxKAANS-XXTX
Apacer’s SATA-Disk Module 3 (SDM3) is a high-performance, embedded SSD designed to replace the
conventional SATA hard disk drive. SDM SSD can be plugged into a standard Serial ATA 7-pin connector
commonly found in desktops, IT-STB, industrial PC and thin client systems. Moreover, Apacer provides
an innovative way for design-in customers to strengthen the vibration-resistance between SDM3 and
mainboard.
Apacer’s SDM3 has a built-in microcontroller with file management firmware that communicates with
SATA standard interface. This means SDM3 does not require additional or proprietary host software such
as Flash File System (FFS) and Memory Technology Driver (MTD). This product is well suited for
embedded flash storage applications offering new and expanded functionalities as well as more cost-
effective designs, better performance and increased reliability.
SDM3 Series is designed to work at 5 Volts and uses a standard SATA driver that complies with major
operating systems such as Microsoft’s Windows series.
Featuring technologies as Apacer-specific Wear-leveling algorithms, S.M.A.R.T, Enhanced Data Integrity,
Intelligent Power Failure Recovery, ATA Secure Erase, and TRIM, Apacer assures users of a versatile
device on data storage.
1.1 Performance-Optimized Controller
The heart of SDM3 is the Flash controller, which translates standard SATA signals into the data and
controls of the flash media. The SATA and Flash Management controller are specifically designed to
attain high data throughput from the host to the flash.
1.1.1 Power Management Unit (PMU)
The power management unit (PMU) controls the power consumption of SDM3. It can dramatically extend
product battery life by leaving the idle part of the circuitry into sleep mode. The PMU has zero wake-up
latency.
1.1.2 SRAM Buffer
The Flash Controller performs as a SRAM buffer to optimize the host’s data transfer to and from the flash
media.
3
© 2011 Apacer Technology Inc.
Rev. 1.1