NAND08GAH0JZC5E NUMONYX, NAND08GAH0JZC5E Datasheet - Page 25

• Manufacturer Part Number: NAND08GAH0JZC5E
• Description: IC FLASH 8GBIT 52MHZ 153LFBGA
• Manufacturer: NUMONYX

Specifications of NAND08GAH0JZC5E

• Format - Memory: FLASH
• Memory Type: FLASH - Nand
• Memory Size: 8G (1G x 8)
• Speed: 52MHz
• Interface: MMC, SPI
• Voltage - Supply: 3.135 V ~ 3.465 V
• Operating Temperature: -25°C ~ 85°C
• Package / Case: 153-LFBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NAND08GAH0J, NAND16GAH0H
7.5
7.6
7.7
RCA (relative card address) register
The writable 16-bit relative card address (RCA) register carries the device address assigned
by the host during the device identification. This address is used for the addressed host-card
communication after the device identification procedure. The default value of the RCA
register is ‘0x0001’. The value ‘0x0000’ is reserved to set all cards into the standby state
with CMD7. For details refer to section 8.5 of the JEDEC Standard Specification No.
JESD84-A43.
DSR (driver stage register) register
The 16-bit driver stage register (DSR) can be optionally used to improve the bus
performance for extended operating conditions (depending on parameters like bus length,
transfer rate or number of devices on the bus).
The CSD register contains the information concerning the DSR register usage.
The default value of the DSR register is ‘0x404’. For details refer to section 8.6 of the
JEDEC Standard Specification No. JESD84-A43.
Status register
The status register provides information about the device current state and completion
codes for the last host command. The device status can be explicitly read (polled) with the
SEND_STATUS command. The MultiMediaCard status register structure is defined in
section 7.12 of the JEDEC Standard Specification No. JESD84-A43.
Device registers
25/32