AT24C04B-TSU-T Atmel, AT24C04B-TSU-T Datasheet - Page 3

• Manufacturer Part Number: AT24C04B-TSU-T
• Description: IC EEPROM 4KBIT 1MHZ SOT23-5
• Manufacturer: Atmel

Specifications of AT24C04B-TSU-T

• Format - Memory: EEPROMs - Serial
• Memory Type: EEPROM
• Memory Size: 4K (512 x 8)
• Speed: 400kHz, 1MHz
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: SOT-23-5, SC-74A, SOT-25
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

1.
5226G–SEEPR–11/09
Table 1. Write Protect
Pin Description
SERIAL CLOCK (SCL): The SCL input is used to positive edge clock data into each EEPROM device and negative
edge clock data out of each device.
SERIAL DATA (SDA): The SDA pin is bidirectional for serial data transfer. This pin is open drain driven and may be
wire-ORed with any number of other open-drain or open-collector devices.
DEVICE/PAGE ADDRESSES (A2, A1, A0): The AT24C04B uses the A2 and A1 inputs for hard wire addressing and a
toal of four 4K devices may be addressed on a single bus system. The A0 pin is a no connect and can be connected to
ground (device addressing is discussed in detail under the Device Addressing section).
The AT24C08B only uses the A2 input for hardware addressing and a total of two 8K devices may be addressed on a
single bus system. The A0 and A1 pins are no connects and can be connected to ground (device addressing is
discussed in detail under the Device Addressing section).
At V
At GND
WP Pin Status
CC
Full Array
Normal Read/Write Operations
Part of the Array Protected
24C04B/08B
Two-wire Serial EEPROM
3