MIKROE-598 mikroElektronika, MIKROE-598 Datasheet - Page 7

• Manufacturer Part Number: MIKROE-598
• Description: Development Boards & Kits - 8051 BIG8051 DEVELOPMENT SYSTEM
• Manufacturer: mikroElektronika

Specifications of MIKROE-598

• Rohs: yes
• Product: Development Kits
• Tool Is For Evaluation Of: AT89S8253
• Core: 8051
• Interface Type: CAN, MMC/SD, RS-232, USB
• Operating Supply Voltage: 5 V, 9 V to 32 V
• Data Bus Width: 8 bit
• Description/function: Development Board Only, GLCD, LCD, DS1820, Serial Cable not included
• Dimensions: 265 mm x 220 mm
• For Use With: AT89S8253

BIG8051
2.0. C8051F040 microcontroller
The BIG8051 development system comes with a 100-pin microcontroller C8051F040 in TQFP package. The
microcontroller is soldered on the MCU card. It’s key features are as follows:
The microcontroller provided on the development system can be easily replaced with another one. When choosing another
microcontroller, it is very important to compare its and C8051F040’s pinouts to make sure that they are compatible. If
you use a microcontroller with different pinout, some on-board modules will probably not work. Anyway, if you decide to
use another microcontroller, it is also necessary to provide an MCU card to solder the new microcontroller on.
- Pipelined instruction architecture executes 70% of instruction set in 1 or 2 system clocks;
- Up to 25 MIPS throughput with 25 MHz clock;
- 4352 bytes internal data RAM (4 k + 256);
- 64 kB Flash; in-system programmable in 512-byte sectors;
- Bosch Controller Area Network (CAN 2.0B), hardware SMBus™ (I2C™ Compatible), SPI™, and two UART
- Internal calibrated programmable oscillator: 3 to 24.5 MHz; etc.
serial ports available concurrently;
Microcontroller C8051F040
Microcontroller’s pinout
MikroElektronika
7