MIKROE-798 mikroElektronika, MIKROE-798 Datasheet - Page 7

• Manufacturer Part Number: MIKROE-798
• Description: Development Boards & Kits - PIC / DSPIC EASYPIC v7 DEVELOPMENT SYSTEM
• Manufacturer: mikroElektronika

Specifications of MIKROE-798

• Rohs: yes
• Product: Development Boards
• Tool Is For Evaluation Of: PIC18F45K22
• Core: PIC
• Interface Type: RS-232, USB
• Operating Supply Voltage: 5 V
• Description/function: Development board only, touch screen, pencil, DS1820, LCD, serial cable, GLCD not included
• Dimensions: 266 mm x 220 mm

How to power the board?
1. With USB cable
To power the board with USB cable, place jumper J6 in
USB position and place jumper J5 in 5V or 3.3V position.
You can then plug in the USB cable as shown on images
2. Using adapter
To power the board via adapter connector, place jumper
J6 in EXT position, and place jumper J5 in 5V or 3.3V
position. You can then plug in the adapter cable as shown
on images
3. With laboratory power supply
To power the board using screw terminals, place jumper
J6 in EXT position, and place jumper J5 in 5V or 3.3V
position. You can then screw-on the cables in the screw
terminals as shown on images
power switch ON.
1
and
2
, and turn the power switch ON.
3
and
4
, and turn the power switch ON.
Set J6 jumper to
USB position
Set J6 jumper to
EXT position
Set J6 jumper to
EXT position
5
and
6
, and turn the
EasyPIC
3.3V and 5V power supply on a single board.
This feature enables you to use wide range of
peripheral boards.
™
v7 development board supports both
Power supply:
Power capacity:
1
3
5
up to 500mA with USB, and up to 600mA
with external power supply
via DC connector or screw terminals
(7V to 23V AC or 9V to 32V DC),
or via USB cable (5V DC)
page 7
2
4
6