S-24CS64A0I-J8T1G Seiko Instruments, S-24CS64A0I-J8T1G Datasheet - Page 9

• Manufacturer Part Number: S-24CS64A0I-J8T1G
• Description: IC EEPROM 64KBIT 400KHZ 8SOP
• Manufacturer: Seiko Instruments

Specifications of S-24CS64A0I-J8T1G

• Format - Memory: EEPROMs - Serial
• Memory Type: EEPROM
• Memory Size: 64K (8K x 8)
• Speed: 400kHz
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-SOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Rev.4.2
1. A0, A1 and A2 (Slave Address Input) Pins
2. SDA (Serial Data Input / Output) Pin
3. SCL (Serial Clock Input) Pin
4. WP (Write Protection Input) Pin
Pin Functions
The slave address is assigned by connecting pins A0, A1 and A2 to the GND or to the V
One of the eight different slave address can be assigned by the combination of pins A0, A1 and A2.
The given slave address, which is compared with the slave address transmitted from the master device, is
used to select the one among the multiple devices connected to the bus. The address input pin should be
connected to the GND or to the V
The SDA pin is used for bi-directional transmission of serial data. It consists of a signal input pin and an
Nch open-drain output pin.
The SDA line is usually pulled up to the V
devices.
The SCL pin is used for serial clock input. Since signals are processed at the rising or falling edge of the
SCL clock input signal, attention should be paid to the rising time and falling time to conform to the
specifications.
The write protection is enabled by connecting the WP pin to the V
protection, connect the pin to the GND.
_00
CC
.
Seiko Instruments Inc.
CC
, and OR-wired with other open-drain or open-collector output
2-WIRE CMOS SERIAL E
CC
. When there is no need for write
CC
S-24CS64A
respectively.
2
PROM
9