MAX66903-K00 Maxim Integrated, MAX66903-K00 Datasheet - Page 4

• Manufacturer Part Number: MAX66903-K00
• Description: RFID Transponder Tools MAX6100/20/40 Eval Kit
• Manufacturer: Maxim Integrated

Specifications of MAX66903-K00

• Product: Evaluation Kits
• Description/function: ISO 15693 Readers
• Frequency: 13.56 MHz
• Interface Type: USB
• Tool Is For Evaluation Of: MAX66100/MAX66120/MAX66140
• Part # Aliases: 90-66903-K00
• For Use With: MAX66100/MAX66120/MAX66140 ISO Cards

• MAX66903 EV kit (USB cable included)
• User-supplied Windows XP, Windows Vista, or
• MAX66140 ISO card (supplied with EV kit)
Note: In the following sections, software-related items are
identified by bolding. Text in bold refers to items directly
from the EV kit software. Text in bold and underlined
refers to items from the Windows operating system.
The EV kit is fully assembled and tested. Follow the steps
below for proper operation.
1) Visit
2) Install the EV kit software on your computer by run-
3) Install the FTDI USB drivers by running the
4) Connect the provided Mini-USB cable to the
Maxim Integrated
Windows 7 PC with a spare USB port
download the latest version of the kit software,
66903Rxx.ZIP. Save the file to a temporary folder
and uncompress the ZIP file.
ning the SETUP.EXE program inside the temporary
folder. The program files are copied and icons are
created in the Windows Start | Programs menu.
CDM20814_SETUP.EXE program inside the tempo-
rary folder.
MAX66903 and the PC. A Building Driver Database
window pops up in addition to New Hardware
Found message when installing the USB driver for
the first time. Administrator privileges are required to
install the USB device driver on Windows platforms.
www.maximintegrated.com/evkitsoftware
Evaluates: MAX66100/MAX66120/MAX66140
Software Installation and
Instruction Procedure
Required Equipment
Quick Start
to
5) Run the MAXIMHFRFID.APPLICATION.EXE pro-
6) When the MAXIMHFRFID.APPLICATION.EXE is
7) Place a MAX66140 ISO card on the on-board anten-
8) Read and display the memory of the tag by pressing
9) Load the secret in the SHA Secret text box then
10) Select any page number and click Authenticate.
11) For more information about SHA-1 authentication or
gram in the Start | Programs | MAXHFRFID
menu. If you get an error requesting Microsoft.
VisualBasic.PowerPacks, close the MAXIMHFRFID.
APPLICATION.EXE program and install the
VISUALBASICPOWERPACKSSETUP.EXE
gram in the temporary folder. When program has
completed the installation, close it and then rerun
the MAXIMHFRFID.APPLICATION.EXE program.
running, select the COM Port associated with the
USB device. See
na and select the Find Tags button. See
the Read Memory button. This can only occur if a
tag has been found. See
click the Load button.
If the SHA-1 MAC received is the same as what
was calculated, the pass/fail button will be GREEN.
Otherwise, it will be RED. See
the MAX66140, refer to the MAX66140 IC data sheet.
Figure
2.
Figure
Figure
4.
5.
Figure
pro-
3.
4