UPG2422TK-EVAL-A CEL, UPG2422TK-EVAL-A Datasheet - Page 14

• Manufacturer Part Number: UPG2422TK-EVAL-A
• Description: Switch IC Development Tools .5-6GHz 3 Volt Typ. Evaluation Board
• Manufacturer: CEL

Specifications of UPG2422TK-EVAL-A

• Rohs: yes
• Tool Is For Evaluation Of: uPG2422TK
• Description/function: Evaluation Board

Infrared Reflow
Wave Soldering
Partial Heating

RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and
conditions other than those recommended below, contact your nearby sales office.
Do not use different soldering methods together (except for partial heating).
R09DS0013EJ0100 Rev.1.00
Jan 20, 2011
PG2422TK
Soldering Method
Peak temperature (package surface temperature) : 260C or below
Time at peak temperature
Time at temperature of 220C or higher
Preheating time at 120 to 180C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
Peak temperature (molten solder temperature)
Time at peak temperature
Preheating temperature (package surface temperature) : 120C or below
Maximum number of flow processes
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
Peak temperature (terminal temperature)
Soldering time (per side of device)
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
Soldering Conditions
CAUTION
: 10 seconds or less
: 60 seconds or less
: 12030 seconds
: 3 times
: 260C or below
: 10 seconds or less
: 1 time
: 350C or below
: 3 seconds or less
Condition Symbol
WS260
Page 14 of 15
HS350
IR260