DS1248Y-70IND+ Maxim Integrated Products, DS1248Y-70IND+ Datasheet - Page 7

• Manufacturer Part Number: DS1248Y-70IND+
• Description: IC NVSRAM 1MBIT 70NS 32DIP
• Manufacturer: Maxim Integrated Products

Specifications of DS1248Y-70IND+

• Format - Memory: RAM
• Memory Type: NVSRAM (Non-Volatile SRAM)
• Memory Size: 1M (128K x 8)
• Speed: 70ns
• Interface: Parallel
• Voltage - Supply: 4.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-DIP Module (600 mil), 32-EDIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

DS1248/DS1248P 1024k NV SRAM with Phantom Clock
Figure 2. Phantom Clock Register Definition
AM/PM/12/24-MODE
Bit 7 of the hours register is defined as the 12-hour or 24-hour mode-select bit. When high, the 12-hour
mode is selected. In the 12-hour mode, bit 5 is the AM/PM bit with logic high being PM. In the 24-hour
mode, bit 5 is the second 10-hour bit (20–23 hours).
OSCILLATOR AND RESET BITS
Bits 4 and 5 of the day register are used to control the RST and oscillator functions. Bit 4 controls the
RST (pin 1). When the RST bit is set to logic 1, the RST input pin is ignored. When the RST bit is set to
logic 0, a low input on the RST pin will cause the phantom clock to abort data transfer without changing
data in the watch registers. Bit 5 controls the oscillator. When set to logic 1, the oscillator is off. When set
to logic 0, the oscillator turns on and the watch becomes operational. These bits are shipped from the
factory set to a logic 1.
7 of 18