AT45DB081D-MU Atmel, AT45DB081D-MU Datasheet - Page 35

• Manufacturer Part Number: AT45DB081D-MU
• Description: IC FLASH 8MBIT 66MHZ 8VDFN
• Manufacturer: Atmel

Specifications of AT45DB081D-MU

• Format - Memory: FLASH
• Memory Type: DataFLASH
• Memory Size: 8M (4096 pages x 264 bytes)
• Speed: 66MHz
• Interface: SPI, RapidS
• Voltage - Supply: 2.7 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-VFQFN, 8-VFQFPN
• Architecture: Sectored
• Interface Type: SPI
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.7 V
• Maximum Operating Current: 15 mA
• Mounting Style: SMD/SMT
• Organization: 64 KB x 16
• Density: 8Mb
• Access Time (max): 6ns
• Boot Type: Not Required
• Address Bus: 1b
• Operating Supply Voltage (typ): 3/3.3V
• Operating Temp Range: -40C to 85C
• Package Type: MLF EP
• Program/erase Volt (typ): 2.7 to 3.6V
• Sync/async: Synchronous
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Supply Current: 15mA
• Mounting: Surface Mount
• Pin Count: 8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

19. Input Test Waveforms and Measurement Levels
20. Output Test Load
21. AC Waveforms
3596M–DFLASH–5/10
t
Six different timing waveforms are shown on
low when CS makes a high-to-low transition, and waveform 2 shows the SCK signal being high
when CS makes a high-to-low transition. In both cases, output SO becomes valid while the
SCK signal is still low (SCK low time is specified as t
Atmel
patible with SPI Mode 0 and SPI Mode 3, respectively.
Waveform 3 and waveform 4 illustrate general timing diagram for RapidS serial interface. These
are similar to waveform 1 and waveform 2, except that output SO is not restricted to become
valid during the t
imum frequency = 66MHz) of the Atmel RapidS serial case.
R
, t
F
< 2 ns (10% to 90%)
®
RapidS
DRIVING
LEVELS
AC
™
WL
serial interface but for frequencies up to 66MHz. Waveforms 1 and 2 are com-
0.45V
period. These timing waveforms are valid over the full frequency range (max-
2.4V
DEVICE
UNDER
TEST
1.5V
30pF
page
AC
MEASUREMENT
LEVEL
36. Waveform 1 shows the SCK signal being
WL
). Timing waveforms 1 and 2 conform to
Atmel AT45DB081D
35