AT17LV002-10BJI Atmel, AT17LV002-10BJI Datasheet - Page 9

IC SRL CONFIG EEPROM 2M 44-PLCC

AT17LV002-10BJI

Manufacturer Part Number
AT17LV002-10BJI
Description
IC SRL CONFIG EEPROM 2M 44-PLCC
Manufacturer
Atmel
Datasheet

Specifications of AT17LV002-10BJI

Programmable Type
Serial EEPROM
Memory Size
2Mb
Voltage - Supply
3 V ~ 3.6 V, 4.5 V ~ 5.5 V
Operating Temperature
-40°C ~ 85°C
Package / Case
44-LCC (J-Lead)
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
AT17LV002-10BJI
Manufacturer:
Atmel
Quantity:
10 000
7. Cascading Serial Configuration EEPROMs
8. AT17LV Series Reset Polarity
9. Programming Mode
10. Standby Mode
2321I–CNFG–2/08
For multiple FPGAs configured as a daisy-chain, or for FPGAs requiring larger configuration
memories, cascaded configurators provide additional memory.
After the last bit from the first configurator is read, the clock signal to the configurator asserts its
CEO output Low and disables its DATA line driver. The second configurator recognizes the Low
level on its CE input and enables its DATA output.
After configuration is complete, the address counters of all cascaded configurators are reset if
the RESET/OE on each configurator is driven to its active (Low) level.
If the address counters are not to be reset upon completion, then the RESET/OE input can be
tied to its inactive (High) level.
The AT17LV65 devices do not have the CEO feature to perform cascaded configurations.
The AT17LV series configurator allows the user to program the reset polarity as either
RESET/OE or RESET/OE. This feature is supported by industry-standard programmer
algorithms.
The programming mode is entered by bringing SER_EN Low. In this mode the chip can be pro-
grammed by the Two-Wire serial bus. The programming is done at V
Programming super voltages are generated inside the chip.
The AT17LV series configurators enter a low-power standby mode whenever CE is asserted
High. In this mode, the AT17LV65/128/256 configurator consumes less than 50 µA of current at
3.3V (100 µA for the AT17LV512/010 and 200 µA for the AT17LV002/040). The output remains
in a high-impedance state regardless of the state of the OE input.
AT17LV65/128/256/512/010/002/040
CC
supply only.
9

Related parts for AT17LV002-10BJI