MIC3201YME Micrel Inc, MIC3201YME Datasheet - Page 16

• Manufacturer Part Number: MIC3201YME
• Description: IC LED DRIVER 8ESOIC
• Manufacturer: Micrel Inc
• Type: HBLED Driverr

Specifications of MIC3201YME

• Topology: PWM, Step-Down (Buck)
• Constant Current: Yes
• Number Of Outputs: 1
• Internal Driver: Yes
• Type - Primary: General Purpose
• Type - Secondary: High Brightness LED (HBLED)
• Frequency: 1MHz
• Voltage - Supply: 6 V ~ 20 V
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width) Exposed Pad, 8-eSOIC. 8-HSOIC
• Operating Temperature: -40°C ~ 85°C
• Current - Output / Channel: 1A
• Internal Switch(s): Yes
• Efficiency: 90%
• Led Driver Application: Architectural, Industrial, Ambient Lighting
• No. Of Outputs: 1
• Output Current: 1A
• Input Voltage: 6V To 20V
• Dimming Control Type: PWM
• Operating Temperature Range: -40°C To
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Output: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 576-3659-5; MIC3201YME

Micrel, Inc.
MIC3201
Recommended Landing Pattern
8-Pin ePAD SOIC
MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA
TEL [phone] FAX [phone] WEB
http://www.micrel.com
Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This
information is not intended as a warranty and Micrel does not assume responsibility for its use. Micrel reserves the right to change circuitry,
specifications and descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual
property rights is granted by this document. Except as provided in Micrel’s terms and conditions of sale for such products, Micrel assumes no liability
whatsoever, and Micrel disclaims any express or implied warranty relating to the sale and/or use of Micrel products including liability or warranties
relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product
can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical
implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user.
A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is a Purchaser’s own risk and Purchaser agrees to
fully indemnify Micrel for any damages resulting from such use or sale.
© 2009 Micrel, Incorporated.
February 2011
16
M9999-021011-B