TMP05AKSZ-500RL7 Analog Devices Inc, TMP05AKSZ-500RL7 Datasheet - Page 9

• Manufacturer Part Number: TMP05AKSZ-500RL7
• Description: IC PWM TEMP SNSR CMOS/TTL SC70-5
• Manufacturer: Analog Devices Inc

Specifications of TMP05AKSZ-500RL7

• Function: Temp Monitoring System (Sensor)
• Topology: ADC (Sigma Delta), Averaging Control
• Sensor Type: Internal
• Sensing Temperature: -40°C ~ 150°C
• Output Type: CMOS/TTL
• Output Alarm: No
• Output Fan: No
• Voltage - Supply: 3 V ~ 5.5 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Surface Mount
• Package / Case: SC-70-5, SC-88A, SOT-323-5, SOT-353, 5-TSSOP
• Ic Output Type: Digital
• Sensing Accuracy Range: ± 2°C
• Supply Current: 425µA
• Supply Voltage Range: 3V To 5.5V
• Resolution (bits): 12bit
• Sensor Case Style: SC-70
• No. Of Pins: 5
• Temperature Sensor Function: Temp Sensor
• Package Type: SC-70
• Operating Temperature (min): -40C
• Operating Temperature (max): 150C
• Operating Temperature Classification: Automotive
• Operating Supply Voltage (min): 3V
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 5.5V
• Accuracy: ± 0.5
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: TMP05AKSZ-500RL7TR

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
Table 5. Pin Function Descriptions
Pin No.
1
2
3
4
5
Mnemonic
OUT
CONV/IN
FUNC
GND
V
DD
Description
Digital Output. Pulse-width modulated (PWM) output gives a square wave whose ratio of high-to-low period is
proportional to temperature.
Digital Input. In continuously converting and one shot operating modes, a high, low, or float input determines the
temperature measurement rate. In daisy-chain operating mode, this pin is the input pin for the PWM signal from
the previous part on the daisy chain.
Digital Input. A high, low, or float input on this pin gives three different modes of operation. For details, see the
Operating Modes section.
Analog and Digital Ground.
Positive Supply Voltage, 3.0 V to 5.5 V. Using a decoupling capacitor of 0.1 μF as close as possible to this pin is
strongly recommended.
CONV/IN
FUNC
OUT
Figure 5. Pin Configuration
Rev. B | Page 9 of 28
1
2
3
(Not to Scale)
TOP VIEW
TMP05/
TMP06
5
4
V
GND
DD
TMP05/TMP06